[tazmantic]

Re: Samsung Q1435S

Right done some more investigating, there is continuity through the loom to the motor and also through the windings of the motor (3.7 ohms) cant see any signs of blown components on the board, if I try to run the machine without the motor connected it comes up with error 3E, with the motor connected 8E… have checked the voltage across the motor when it is juddering and thats all over the place up and down from about 70 to 140 volts…..Oh also noticed if I disconnect the REACTOR the motor does not try to run and it shows error 3E……HELP.

Does this def sound like the pcb board

Thanks 8)

[tazmantic]

Re: Samsung Q1435S

Oh dear…… are there any tests I can do to confirm it is the PCB I do have test equipment as Im a sparky by trade..

Thanks

8)

[tazmantic]

Re: Indesit idl40 error code

Thanks for that, took the pump out sunday, was not blocked so made sure pump ran freely, blew water out of the pipe and put it back together….. hay presto it worked im now popular lol 😆

Thanks for all your help.. 8)

[tazmantic]

Re: Indesit idl40 error code

Ok ive not tryed yet but thought I would just ask, how easy is it to get to the pump…. I have changed pumps on washing machines before but not dishwashers…

Thanks

[tazmantic]

Re: Indesit idl40 error code

Thanks again Jim ill have to try and get to the the pump and have a look….

[tazmantic]

Re: Indesit idl40 error code

Well all filters cleaned and it started…. 😆 it ran a cycle then stopped, lights 1 and 2 are flashing and its still full of water.. 😥 any ideas or is it the great scrap yard in the sky for it…..

[tazmantic]

Re: Indesit idl40 error code

Thanks for that Jim, and its not actually my machine so will tell them off….lol, will give it a go but it does just fill up then stop and the lights start to flash it wont even try and wash…. :rolls:

[Author]

Posts