[thefuzzybear]

Re: Diplomat ADP3850 seems to be dead

Thanks for all your help guys 🙂

[thefuzzybear]

Re: Diplomat ADP3650 seems to be dead

Hi there

Looks like I got the model number incorrect and it was actually ADP 3650
We’ve opened it up and it looks like the clock/timer has gone 🙁 Based on this, we’ve decided to bin it 🙁

[thefuzzybear]

Re: Diplomat ADP3850 seems to be dead

I haven’t checked the fuse yet…I will be doing that next
Also the model number that I read off the side of the oven is ADP3850
The serial number if that helps is 06 106621 09

Thanks for all your help so far 🙂

[thefuzzybear]

Re: Diplomat ADP3850 seems to be dead

Hi there

Thanks for the update.
The display is an LED display and it does have a timer. However, it is blank and the buttons don’t seem to be doing anything

I’m assuming then that this means that the Main Terminal Block is gone??
If I may ask, whats one of these?? Can it be replaced?? Is it expensive to replace and is it worth it??

[thefuzzybear]

Re: Neff S5443X1GB fills but does not wash

Hi there

followed your advice…removed the right hand side panel to gain access to the motor and tried to move the blades. Unfortunately, the blades did not move 🙁

Based on what has been posted, I guess its the motor that has packed up.
There are two rubber clips either side of the motor which we have unclipped. There are also three cables going into the top of the motor which we have also unclipped. the motor is now free but still connected to the pipes. We can’t see any further screws or clips. It looks like its connected to a white disc but we can’t see any visible clips to unclip 😕 Can you please advise in how we can remove the motor?? If you require a picture then let me know and I send it to you or upload it somewhere for you to see (pls provide instructions on where and how)

Many Thanks

[thefuzzybear]

Re: Neff S5443X1GB fills but does not wash

Thanks for the confirmation

I shall let you know how it goes

Cheers

[Author]

Posts