TOWAN

Forum Replies Created

Viewing 15 posts - 16 through 30 (of 36 total)
1 2 3
  • Author
    Posts
  • December 17, 2006 at 10:48 am in reply to: TRICITY CSIG50X FSD PART NUMBER? #197997
    TOWAN
    Participant

    Re: TRICITY CSIG50X FSD PART NUMBER?

    many thanks!
    Dan

    November 8, 2006 at 5:45 pm in reply to: Baumatic Dishwasher BDW8 Nothing on control panel #194488
    TOWAN
    Participant

    Re: Baumatic Dishwasher BDW8 Nothing on control panel

    you will need to leave it to dry out as well.If the motor gets wet then nothing works till it all drys out.
    Once dry it should work again.

    November 8, 2006 at 5:41 pm in reply to: Baumatic BDW13 #194492
    TOWAN
    Participant

    Re: Baumatic BDW13

    Made by haire. Chinese pile of cr*p!!
    not nice to work on and have some serious design faults.

    September 26, 2006 at 1:21 pm in reply to: Baumatic – oven problem #189680
    TOWAN
    Participant

    Re: Baumatic – oven problem

    will need a corgi engineer to repair oven,
    use link below to find a engineer

    September 4, 2006 at 9:04 am in reply to: John Lewis Own Brand #187413
    TOWAN
    Participant

    Re: John Lewis Own Brand

    Cheers Dave!

    August 22, 2006 at 8:19 am in reply to: Gas Installation in Tavistock, Devon #185548
    TOWAN
    Participant

    Re: Gas Installation in Tavistock, Devon

    If you have not found someone pm me.
    Dan

    August 9, 2006 at 5:02 pm in reply to: Baumatic #139804
    TOWAN
    Participant

    Re: Baumatic

    Was the sevice engineer for Baumatic in the south west for 4 years.
    Any help i can give on products just ask.
    Baumatic do not produce any appliances.
    All badged up from other manufacturers.
    Some good some really bad!!
    Owned by a Itailian man call Enzo.

    July 20, 2006 at 2:38 pm in reply to: INDESIT W103 WASHING MACHINE #181933
    TOWAN
    Participant

    Re: INDESIT W103 WASHING MACHINE

    thanxs again Dave
    8 flashes heater relay fault
    new board fitted all ok!!

    July 18, 2006 at 8:30 am in reply to: INDESIT W103 WASHING MACHINE #181932
    TOWAN
    Participant

    Re: INDESIT W103 WASHING MACHINE

    thanx for your replys!
    Cheers Dave, forgot the code thread!!

    June 19, 2006 at 6:44 am in reply to: Fitting Gaggenau door seal #179025
    TOWAN
    Participant

    Re: Fitting Gaggenau door seal

    😳
    LOL!!

    June 15, 2006 at 8:19 am in reply to: Fitting Gaggenau door seal #179023
    TOWAN
    Participant

    Re: Fitting Gaggenau door seal

    Hi There,
    Used to be the gaggenau engineer for bsh and remember this job well!!
    Is a complete pain of a job.
    From memory the door is either triple or double glazed which all has to come apart and the door seal sandwhichs between it all.
    there is a retaining strip between the doors that grips the seal which you can not see when putting back together.
    Used to be a good hour to hour and a half when you now what you are doing!!
    GOOD LUCK MATE!!!!!

    June 12, 2006 at 10:27 am in reply to: Baumatic Single fan oven #178935
    TOWAN
    Participant

    Re: Baumatic Single fan oven

    sounds about right
    have a single baumatis and the cooling fan rarely carrys on after cooker switched off on fan oven.
    the stat that controls this is near the top oven element so may well get hotter when using conventinal oven rather than fan assist.

    June 12, 2006 at 8:25 am in reply to: Baumatic Single fan oven #178933
    TOWAN
    Participant

    Re: Baumatic Single fan oven

    just remebered they brought out a replacement neon with a resistor to stop this problem.
    but when fitted the neon was alot dimmer and people complained.
    Is a low resistance from the element and will sort it self out with use!!
    was fun haveing to go to customers with new machines and tell them this fault was normal!!!

    June 12, 2006 at 8:21 am in reply to: Baumatic Single fan oven #178932
    TOWAN
    Participant

    Re: Baumatic Single fan oven

    Was a engineer for Baumatic for 4 years and this was a common problem.Will go out after element has been used a few times.

    May 26, 2006 at 9:42 am in reply to: Dyson #150635
    TOWAN
    Participant

    Re: Dyson

    If you purchase a certain amount of Dyson cleaners you will get a FREE 5 year guarantee to go with the cleaner.
    Contact you Dyson rep or parts center/connects rep for details.
    Dan

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 36 total)
1 2 3