[ttcchh]

Re: Smeg A3A or A3 door glasses

Hi Dave, that’s the LH in stainless Steel for the A3. That’s available and so is the RH in black for the A3A….Problem is I need either LH in black or RH in stainless steel to make a matching pair. The cooker is a A3A and is black…
The original black LH glass shattered whilst an engineer was repairing and currently we fitted the stainless one to allow use. The customer will accept both in stainless if I can get the other or ideally the LH in black.
Either will solve the problem but I’m not holding up much hope.
regards Tony

[ttcchh]

Re: Fisher & Paykel RF540 fridge freezer F20 error code

Thanks for that response John. Will investigate.
Tony

[ttcchh]

Re: Hotpoint FF40P Error indications ?

Many Thanks for that, Any idea what it means ? Has not done it again since the reset. The customer will monitor

[ttcchh]

Re: WIRING DIAGRAM FOR A SERVIS M3094

Has been received
Thanks Brian
Tony

[ttcchh]

Re: SERVIS WASHER DRYER M9150 BLOWING F9-F10ON MODULE

Thanks Ian

In your opinion is it one or the other ? or does remaking the connection tight on a new module cure the problem ? The tags are 1/4 blades and I was going to cut the loom and tag seperatly with covers to ensure a good connection….what do you think

Many thanks

Tony

[ttcchh]

Re: De-Dietrich Fault Code needed Urgently!

ER3 means that the temperature probe is being read as open or short circuit by the PCB.

Hope it helps

[Author]

Posts