[uncleCoco]

Re: Wash program quits early on Bosch SGS6302GB

Forgot to say, when it does get going, it heats the water fine.

[uncleCoco]

Re: Wash program quits early on Bosch SGS6302GB

Update time.

No deposit build-up on the components mentioned. But now the dishwasher is cutting out a lot earlier, usually after a couple of minutes, and the entire display switches off. It then refuses to activate until several minutes later, but even then only to display “0”.

Total electrical meltdown?

I inspected the various components under the control panel at the front (after wall switch off), and there weren’t any obvious breaks or burn-outs.

Is there a way to be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it’s the control module that needs replacing, aside from bringing in an engineer?

Thanks again,
Steve

[uncleCoco]

Re: Wash program quits early on Bosch SGS6302GB

Thanks, Penguin45, much appreciated.

Steve.

[uncleCoco]

Re: Irregular fill problem on Bosch SGS6302GB

Quick update for anyone interested!
Removed the lower front metal panel under the door (with perseverance!) and gained easy access to the short, ribbed pipe I was after. And it was well and truly gunked up…

Thoroughly cleaned out the pipe, and then cleaned out the gubbins that the pipe was attached to. Put it all back together and bingo! – one happy dishwasher.

Many thanks to this site and moderators for providing confidence-inspiring advice, whilst also reminding us amateurs to proceed with caution 😉

Happy Christmas!
Steve

[uncleCoco]

Re: Irregular fill problem on Bosch SGS6302GB

…and never a truer word was spoken 😀

Cheers, iadom 😆

[uncleCoco]

Re: Irregular fill problem on Bosch SGS6302GB

Awesome, many thanks for the prompt and reassuring replies guys!!

Kinds regards,
Steve

[Author]

Posts