[UncleD]

Re: Problem with Smeg DI614H

Thanks Penguin45 for that
At the moment I can get the machine to finish normally by pressing the 3/1 button when it stops. I don’t know if that gives any indication what the real fault is, and I expect it will stop working eventually, but for the moment it seems to be working

[UncleD]

Re: smeg dwi612c not finishing cycle

Hi DaveLad
Shame you had to buy a new one. smeg spares are seem very expensive.
Hi Holty
Have not fixed mine yet, but I have discovered that by pressing the 3/1 button (I don’t think all machines have one) when it stops the machine carries on through the cycle normally. A bit of a pain, and I expect it will finally fail eventually.
If you go to this link

http://www.ukwhitegoods.co.uk/modules.p … ge&pid=316

there is an explaination from one of the moderators about what the problem might be

[UncleD]

Re: smeg dwi612c not finishing cycle

Hi
I have a similar problem with my DI 614 H. Have you managed to solve your problem yet.
On my machine I have a 3/1 button ( for 3 in 1 detergent capsules). I never normally use it, but discovered that by pressing it when I have the problem, it continues through the cycle and finishes normally? I expect that will also go wrong soon.
I would be grateful if you have discovered what your fault is.
Regards

[Author]

Posts