valgee

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • March 16, 2015 at 5:42 pm in reply to: Hotpoint Openspace Oven #425359
    valgee
    Participant

    Re: Hotpoint Openspace Oven Model No. OS 897D C IX/HP

    Any ideas about this fault please? Main oven doesn’t respond when turned on but no fault code displayed. Everything else working OK. Any help would be much appreciated. Thanks.

    March 9, 2015 at 6:16 pm in reply to: Hotpoint Openspace Oven #425358
    valgee
    Participant

    Re: Hotpoint Openspace Oven

    Sorry! Model no. is OS 897D C IX/HP

    December 21, 2010 at 9:08 pm in reply to: Miele Washing machine #339390
    valgee
    Participant

    Re: Miele Washing machine

    I followed your advice, Martin and the machine is now working. Many thanks.

    December 21, 2010 at 12:08 pm in reply to: Miele Washing machine #339385
    valgee
    Participant

    Re: Miele Washing machine

    Hi, It’s a Miele Honeycomb Care, model no. is W3444. 2 lights on the front are flashing – Check drain and Check inlet. Thanks. 🙂

    December 2, 2008 at 4:43 pm in reply to: Whirlpool FCSM6 Fan Oven not heating #269400
    valgee
    Participant

    Re: Whirlpool FCSM6 Fan Oven not heating

    Parts arrived in double quick time. Many thanks.
    One small problem. How do I get the locking ring off the new push button. I don’t want to force it in case it breaks.
    Val

    November 27, 2008 at 3:41 pm in reply to: Whirlpool FCSM6 Fan Oven not heating #269399
    valgee
    Participant

    Re: Whirlpool FCSM6 Fan Oven not heating

    Thanks, John. I’ve now ordered the parts so hopefully it’s problem solved. (almost) 🙂
    Thanks for all your help.
    Val

    November 27, 2008 at 11:57 am in reply to: Whirlpool FCSM6 Fan Oven not heating #269397
    valgee
    Participant

    Re: Whirlpool FCSM6 Fan Oven not heating

    Hi John
    Me again! I’ve had a look at the digital display. The plastic part, which holds the button which you actually push, is broken so the electronic button isn’t actually being pushed 😕 in. Is the part no. you gave me for this or is it for the electronic button? Hope that makes sense.
    Best wishes
    Val 😕

    November 25, 2008 at 1:28 pm in reply to: Whirlpool FCSM6 Fan Oven not heating #269396
    valgee
    Participant

    Re: Whirlpool FCSM6 Fan Oven not heating

    Thank you K and John for your replies. Sorry for not giving you all the necessary information. Have found a leaflet which came with the oven. Its a Whirlpool FCSM6, model no. AKZ451/1X/01. It is just 4 years old. The builder installed it new with all the other appliances when the house was built.
    I think I’ll try replacing the button switch first, if you can tell me how easy it is to do! If I have to replace the control card I think it might be a new oven.
    Thanks again.
    Val

    November 25, 2008 at 11:52 am in reply to: Whirlpool FCSM6 Fan Oven not heating #269393
    valgee
    Participant

    Re: Whirlpool FCSM6 Fan Oven not heating

    Thanks for your reply. The no. on the plate inside the door is 858545115071. Today the control panel isn’t working either! The display says STOP and the middle button which confirms selection won’t push in, so I can’t use the grill either. Help!!
    Many thanks.
    Val 🙁

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)