[Webby69]

Re: paddle fitting instructions lost

thanks for that works fine now

[Webby69]

Re: hotpoint washer water making way back in

Thanks again 😀

[Webby69]

Re: hotpoint washer water making way back in

How do i know which one i need?
:rolls:
Its the wf250 1500spin aquarius model if that helps.

Thanks

[Webby69]

Re: hotpoint washer water making way back in

Narrowed the culprit down its the cold water valve thats letting water back into the washer.
Thanks for all your help just need to get the part sorted now.

[Webby69]

Re: hotpoint washer water making way back in

iadom wrote:Worth mentioning that this machine should have a non return valve in the pump which should prevent water seeping back in from the outlet.

If the water is clean then you may have a faulty inlet valve, very rare on such a young machine but not unheard of. If it still leaks in after you have eliminated the outlet/drain pipe as a possible cause then if the machine is hot & cold fill, turn off the tap to either hot or cold. If it doesn’t fill overnight then the valve from the supply you have turned off is faulty, if it still fills then obviously the other one is.

If it is a cold fill only then turn off the cold tap overnight.

Jim.
Thanks for that jim will have ago at this tonight as before i went on our hols i checked the waste pipe etc and it was clean no sign of blockage etc and yes the water is clean.
Ill turn one of the feeds off later to try and find which one it is.
Presuming the out come will be that what will i be looking at etc for fixing it

Thanks

[Webby69]

Re: hotpoint washer water making way back in

Thanks for that quick response, will check up on that later tonight.

Many thanks

[Author]

Posts