Welshwizard

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: Newpol washing machine #299002
    Welshwizard
    Participant

    Re: Newpol washing machine

    Hi. You can order a belt from the the following suppliers in Spain.
    http://www.fersay.com/view/index.php?menu=227&lang=en
    But as mentioned by Penguin, you will need the four figure number and two letters to get the right belt, which is elasticated. W.W

    in reply to: Zanussi Washing Machine module #293338
    Welshwizard
    Participant

    Re: Zanussi Washing Machine module

    Thanks for your reply.
    Now that’s where the mystery deepens. The tracks were’nt blown on the original module.
    Checked the motor, heater, interlock and pump before fitting the new module. Then set it on a 90 degree wash, and after half an hour I meggered the washing machine, which gave a reading of out of range.
    And it did about six washes before the replacement module went, and still no blown tracks. 😥
    I just hoped that someone had come across the same problem on a Zanussi module.

    in reply to: Bosch Dishwasher SGS 43E02EU.-OVERFILLING #285328
    Welshwizard
    Participant

    Re: Bosch Dishwasher SGS 43E02EU.-OVERFILLING

    Thanks Penguin.
    I’ll go for the flow meter first, and hope that nails it. 🙂
    W.

Viewing 3 posts - 1 through 3 (of 3 total)