[Witzend]

Re: Hotpoint Ultima Close Door Error

Door Interlock received and fitted

Washer working like new

Thanks very much 😀

[Witzend]

Re: Siemens Dishwasher not draining

Is this simple to fit?

Is a special tool required to undo the Impellor and pump?

I can’t seem to find a screwdriver or alan key to fit

[Witzend]

Re: Siemens Dishwasher not draining

The hose is clear I tested it by blowing through it and getting bubbles in the water at the bottom of the dishwasher. When I put the end below the level of the dishwasher floor water drains out. The waste outlet is also clear

So presumably the pump is not working properly?

[Witzend]

Re: Siemens Dishwasher not draining

The ENR number is

SE24201/GB/01

I’ve given the impeller (assuming thats the thing that looks like a rotor blade) a spin and didn’t get a twanging feeling

[Witzend]

Re: Siemens Dishwasher not draining

The hose doesn’t appear to be blocked, I pushed a curtain wire into it and it went the full length without meeting any resistance

[Witzend]

Re: Siemens Dishwasher not draining

Yes whirring and humming and clicking,

(these noises sound like the normal startup as far as I can remember)

[Witzend]

Re: Hotpoint Ultima Close Door Error

Will do

Thanks very much

[Witzend]

Re: Hotpoint Ultima Close Door Error

I’ve found the Door Interlock

How can I test it?

[Witzend]

Re: Hotpoint Ultima Close Door Error

Thanks for your help

Can you tell me what it looks like, where is it and how to test it?

[Author]

Posts