Forum Replies Created
-
Posts
-
Re: Charging rig, hoses & vac pump required
i have a set of lockring pliers i’ve used twice and about 115 fittings of various size.
i think £120 plus p+p for the lot is a fair price.
let me know if you are interested.
john.
staffordshire.Re: bosch not taking conditioner
not sure but i’ll check it.
i take it i should get this initial burst if everything is OK, if not maybe the solenoid is faulty like ou said.
thanks.
johnRe: Hotpoint CTD40G
i’ve got exactly the same problem on a CTD40P.
it is not the door switch or the float switch or the stats above the heater.
power down to the module .
no lights ,no nothing.
micro-switch on the consol PCB seems fine.
no dry joints on either PCB i can see.
i presume it’s one of the PCB’s.
Is the lower power module just a case of replacing it?
or do you have to buy the EPROM seperate and program it?
any advise would be greatly appreciated.
johnRe: neff cooker part
looking from the front :
far rhs is the oven selector , the to the left of this is the grill regulator.
taRe: hpt ctd40 problems
sorry, you are right, it should be in the trade bit, my mistake.
i’ll try and get round to check the on/off , but it did feel like it was making contact and activating the small switch behind it.
jkRe: indesit overfilling
definately no hole in pressure pipe .
probably worth putting a switch on first and seeing what happens.
jkRe: hoover T/D no heat
oh!
didn’t spot that.
have you part numbers for them please?
is it a front panel off job?
cheers.
johnRe: Lok Ring
dont know if it’s of any interest but i’m packing in the fridge game and have loads of lok rings and tools for sale if you are interested.
really cheap.
john
