ajkwales

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 23 total)
1 2
  • Author
    Posts
  • July 15, 2018 at 2:10 pm in reply to: CDA not lighting #456821
    ajkwales
    Participant

    Re: CDA not lighting

    Thanks for the prompt reply

    Held it down for over 40 seconds
    and still not lighting!

    January 15, 2018 at 11:12 am in reply to: Dial not responding #452783
    ajkwales
    Participant

    Re: Dial not responding

    Brushes are ok ty

    January 12, 2016 at 5:42 pm in reply to: Bosch SMS50T06GB #434435
    ajkwales
    Participant

    Re: Bosch SMS50T06GB

    Thanks for replying

    Is it worth repairing?

    June 21, 2015 at 10:22 pm in reply to: Bosch SMS50TO6GB/09 #428332
    ajkwales
    Participant

    Re: Bosch SMS50TO6GB/09

    https://www.google.co.uk/shopping/produ … LkUZ6Kj8AM

    i think it was this, is this the right one please? thanks

    June 21, 2015 at 9:15 pm in reply to: Bosch SMS50TO6GB/09 #428331
    ajkwales
    Participant

    Re: Bosch SMS50TO6GB/09

    ok great thank you,

    Do you know where i can get one from, can find all the other bits except this one!

    June 21, 2015 at 6:54 pm in reply to: Bosch SMS50TO6GB/09 #428329
    ajkwales
    Participant

    Re: Bosch SMS50TO6GB/09

    Is the pump cover the white thing that pulls out from inside the machine, if so i havent got one it broke a few weeks ago,so i tool it out!! but the machine still worked until now.

    thanks again

    June 21, 2015 at 5:41 am in reply to: Bosch SMS50TO6GB/09 #428327
    ajkwales
    Participant

    Re: Bosch SMS50TO6GB/09

    No sounds just the same.

    March 12, 2013 at 11:35 pm in reply to: indesit idl 535! #391902
    ajkwales
    Participant

    Re: indesit idl 535!

    how would i know, and would it be worth repairing?

    thanks again

    March 12, 2013 at 8:52 pm in reply to: indesit idl 535! #391900
    ajkwales
    Participant

    Re: indesit idl 535!

    No the only light that shows at all is the
    red power light!

    September 18, 2011 at 4:24 pm in reply to: Hoover Optima #359001
    ajkwales
    Participant

    Re: Hoover Optima

    Found out where the water was coming from, there was 2 holes in the white drum cover both at the bottom about 1o inches apart.
    The drum itself has buckled inwards in one place and not towards the holes..

    Guess its a new machine then!

    September 14, 2011 at 7:58 pm in reply to: Hoover Optima #358999
    ajkwales
    Participant

    Re: Hoover Optima

    Hiya

    thanks for replying

    on further investigation it actually looks like
    theres a “hole” in the white casing surrounding
    Could you answer a few questions for me please is possible.

    1 any reason for this to happen (there was only a karate suit in there at the time! )
    2 can the plastic thing be replaced, and if so is it worth it
    3 Where can i get 1!


    thanks again
    alana

    April 6, 2010 at 9:23 am in reply to: zanussi zwf1427w #314131
    ajkwales
    Participant

    Re: zanussi zwf1427w

    Hi
    thanks for the reply

    there was a brand new heating element put in 2 weeks ago, it worked
    fine until it just stopped halfway through the program.

    the ball is still in there


    ajk

    April 5, 2010 at 5:33 pm in reply to: zanussi zwf1427w #314129
    ajkwales
    Participant

    Re: zanussi zwf1427w

    thanks for the reply

    Checked both no blockages in either


    ajk

    April 4, 2010 at 11:57 am in reply to: zanussi zwf1427w #314127
    ajkwales
    Participant

    Re: zanussi zwf1427w

    anyone?

    April 3, 2010 at 7:09 pm in reply to: zanussi zwf1427w #314126
    ajkwales
    Participant

    Re: zanussi zwf1427w

    Yet again another problem,

    machine just stopped halfway through the wash, went to reset
    the program but it goes to 0 straight away. whatever program i put it
    on its goes straight to 0 in seconds..

    There is no error code..

    the door doesnt lock either

    thanks
    ajk

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 23 total)
1 2