Alanj

Forum Replies Created

Viewing 15 posts - 271 through 285 (of 757 total)
  • Author
    Posts
  • in reply to: Connect deliveries #357393
    Alanj
    Participant

    Re: Connect deliveries

    I have the same problem with Connect. Never get next day delivery, even though they advertise this on their webpages(anywhere mainland Uk). Yet if I order from Masterpart before 3pm order arrives next day.

    Alan

    in reply to: Miele T8422C #356546
    Alanj
    Participant

    Re: Miele T8422C

    Clayside,
    Are there other stats besides the thermister on the heating element itself?

    Alan

    in reply to: Miele T8422C #356545
    Alanj
    Participant

    Re: Miele T8422C

    Thanks for that clay side. Much appreciated.

    Alan

    in reply to: Miele T8422C #356543
    Alanj
    Participant

    Re: Miele T8422C

    Been out to this appliance and it runs for a short while then stops and then beeps. There is no heat. Element seems ok. There is a small circuit board at top right back of machine that heater and sensor/stat cables plug into. Does not seem to be power going to heating element. Is it likely to be board or a sensor not switching something on the board? These spares are not cheap so would like to get it right.

    Alan

    in reply to: Kompact Double Oven BIEF900SS S/N 0607270079 #348881
    Alanj
    Participant

    Re: Kompact Double Oven BIEF900SS S/N 0607270079

    Looks very much like it.
    Thanks Ken

    in reply to: Miele washing machine #347953
    Alanj
    Participant

    Re: Miele washing machine

    Thanks for the reply guys will let you know how I get on 🙂
    Alan

    in reply to: Siemens WI14S440GB/27 #347411
    Alanj
    Participant

    Re: Siemens WI14S440GB/27

    Thanks for the reply Bosch-engineer. 🙂

    Alan

    in reply to: Samsung RSH1DTMH American F/F #347151
    Alanj
    Participant

    Re: Samsung RSH1DTMH American F/F

    Thanks Panther I’ll check that out.
    Alan

    in reply to: ZKC6020W Prod-948522181 #343262
    Alanj
    Participant

    Re: ZKC6020W Prod-948522181

    I’ve sent you a couple of pics of old and new elements.
    on the new element there are connection numbers 3,4,1 to elements, 2a and P1 on limiter. I assume 2a is still black, so 4-Blue, 3 to Red and White to 1? P1? pilot/hob hot neon(not on this model).

    Alan

    in reply to: ZKC6020W Prod-948522181 #343261
    Alanj
    Participant

    Re: ZKC6020W Prod-948522181

    Hi Martin,
    I think you’ll find it’s been superceded. If you put your number into Masterpart or Connect it comes up with 3890709219. Connections on new element are totally different.

    Alan

    in reply to: ISE10 1606W #344001
    Alanj
    Participant

    Re: ISE10 1606W

    ok Ken thanks

    alan

    in reply to: ISE10 1606W #343999
    Alanj
    Participant

    Re: ISE10 1606W

    Hi Ken, I can only see info for 8065563 50hz Motor and 8063733 60hz motor. This motor 8065833 has 5 terminals + earth and is 0-380hz.
    Terminals 4+5 are tacho.

    Alan

    in reply to: AEG L84950 Prod 91452671100 #343910
    Alanj
    Participant

    Re: AEG L84950 Prod 91452671100

    Thanks for that Franz. 🙂

    Alan

    in reply to: ZKC6020W Prod-948522181 #343259
    Alanj
    Participant

    Re: ZKC6020W Prod-948522181

    Hi Seamy, I have seen that diagram but the replacement element
    has different connections. Anyone else got update for this element?

    Alan

    in reply to: Whirlpool 3XLER5435HQO #341738
    Alanj
    Participant

    Re: Whirlpool 3XLER5435HQO

    Hi Geoff, thanks for the info will go back with belt prepared.

    Alan

Viewing 15 posts - 271 through 285 (of 757 total)