Alanj

Forum Replies Created

Viewing 15 posts - 316 through 330 (of 757 total)
  • Author
    Posts
  • in reply to: Bosch Dishwasher SGV46M43GB #325459
    Alanj
    Participant

    Re: Bosch Dishwasher SGV46M43GB

    Hi Martin, thanks for the info.
    Will let you know how I get on.

    Alan

    in reply to: Siemens B1322NOGB/01 #316791
    Alanj
    Participant

    Re: Siemens B1322NOGB/01

    Hi Greg, I must have been a bit premature. No info come through yet 😥

    Alan

    in reply to: Siemens B1322NOGB/01 #316790
    Alanj
    Participant

    Re: Siemens B1322NOGB/01

    Thanks Greg, much appreciated. 😉

    Alan

    in reply to: Siemens B1322NOGB/01 #316789
    Alanj
    Participant

    Re: Siemens B1322NOGB/01

    Sorry guys it is a Neff. So do you have a copy of wiring diagram?

    Alan

    in reply to: Whirlpool W/D Awg349/3 #316084
    Alanj
    Participant

    Re: Whirlpool W/D Awg349/3

    Hi Brian, did you check for broken wires going at motor plug?

    Alan

    in reply to: Whirlpool 3RLSQ8033SWD #315534
    Alanj
    Participant

    Re: Whirlpool 3RLSQ8033SWD

    Cheers Dave. Will see how it goes. 😮
    Alan

    in reply to: Anyone Interested In Some Work? #311731
    Alanj
    Participant

    Re: Anyone Interested In Some Work?

    Hi Ken,
    you can add me to your list. 😀
    Alan

    in reply to: AW23 Knocking #309143
    Alanj
    Participant

    Re: AW23 Knocking

    Hi Ron,
    did you get to the bottom of your problem noise. You should check the left hand front weight to see if it is loose. ❓

    Alan

    in reply to: AW23 #314805
    Alanj
    Participant

    Re: AW23

    Hi Tim, thanks for the info. 😀

    Alan

    in reply to: Hotpoint BFU620X #313863
    Alanj
    Participant

    Re: Hotpoint BFU620X

    Thanks A1, thought it might be card.

    Alan

    in reply to: Knee Pads #311552
    Alanj
    Participant

    Re: Knee Pads

    Hi Guys, I wear snickers trousers with the removable knee pads. They are very hard wearing. I coudn’t kneel without them, as I have had 2 operations on my left knee over the years. Should have had these trousers with knee pads 30 years ago. 😥
    Alan

    in reply to: CDA CW 494 D/Washer #311407
    Alanj
    Participant

    Re: CDA CW 494 D/Washer

    Hi Mike,
    just for future, I use a large syringe with boiling hot water to flush out the black grill(optical sensor).

    Alan

    in reply to: Whirlpool Water Dispenser #310071
    Alanj
    Participant

    Re: Whirlpool Water Dispenser

    Subs, is it possible that the blockage is ice? The water is probably frozen in the tube, so replacing it won’t help. Insulation in door is likely broken down and requires new door. 🙁

    Alan

    in reply to: AEG Oven intermittent fault. #306715
    Alanj
    Participant

    Re: AEG Oven intermittent fault.

    Hi Madmac,
    does that model have a thermal fuse in the wiring loom behind consul panel? They can be a problem.

    Alan

    in reply to: Zanussi Condenser Dryer #303238
    Alanj
    Participant

    Re: Zanussi Condenser Dryer

    as quoted by cab. 56471210908-locking ring, seal valve small o ring and 56471211005 locking ring,seal,flange larger o ring. 8)

    Alan

Viewing 15 posts - 316 through 330 (of 757 total)