[Albert]

Re: AEG L12710VIT

Thanks, I’ve sent you a pm.

[Albert]

Re: Zanussi ZDT6252 dishwasher

Thanks Mike,

I’ll fit the impellor kit and check for foriegn objects then see how it goes.

[Albert]

Re: Zanussi FJD1666

Thanks for the replies, I’ll run a diagnostics on it and see what happens.

[Albert]

Re: Zanussi FJD1666

I’m not aware that any panel lights are flashing.

I didn’t know there was a diagnostis sequence 😳
how do i do that ?

[Albert]

Re: Identifying Date Codes and Serial Numbers

Whirlpool 12 digit serial numbers
500302123456
50 = factory code
03 = year (2003)
02 = week number

[Albert]

Re: Ariston AF300 d/w not heating

Cheers Dave,

I checked the timer for any sign of terminal damage and there was none,
popped a new timer on even so and the machine works fine now.

Thanks,
Albert

[Albert]

Re: Ariston AF300 d/w not heating

Thanks Dave, I’ll check the tmer.

Albert

[Albert]

Re: Zanussi & Beko part numbers please

Dave,

I got the Beko sorted thanks mate, but the Zanussi is still ongoing
it’s a special at washvac, connect doesn’t find the part number,
I’ve even tried anywhere.com LOL but that didn’t help either.

Regards,
Albert

[Albert]

Re: Zanussi & Beko part numbers please

Thanks a lot Dave,

Albert

[Albert]

Re: Beko fridge

Thanks for trying Dave, I don’t have any details of machine age etc.
I’ll get back to my mate to see if he knows any more.

Albert

[Albert]

Re: Beko fridge

Dave, would you try TL610 and FS70 for me.

Ta
Albert

[Albert]

Re: Beko fridge

Thanks Dave, any info on the form a model number might take ?

Albert

[Albert]

Re: Hotpoint WMTL79 top loader

I went back to this one the following day just to double check for safety devices or anything that I may have missed and to double check the motor and everything seemed ok. I’ve just replaced the module and now have a fully working machine and a smiley, happy customer.

Thanks guys

[Albert]

Re: Whirlpool Dishwaher 6 flashes

Hi Dave

I just checked this one and it’s exactly as John says, water inlet or flow meter. But if it’s filling and starting to wash then I’d suspect either NTC or module too.
I had one today that aborted after a minute or two of washing (though I didn’t count the flashes) and it wouldn’t reset, I took out the new style NTC and fit one of the older ones and off it went.

[Albert]

Re: Hotpoint WMTL79 top loader

Thanks for the help guys.

Albert

[Author]

Posts