allan

Forum Replies Created

Viewing 15 posts - 166 through 180 (of 200 total)
1 2 3 … 11 12 13 14
  • Author
    Posts
  • August 24, 2007 at 12:28 pm in reply to: Indesit a1635uk #225621
    allan
    Participant

    Re: Indesit a1635uk

    Hi Martin and thanks for the quick reply, yes it is an Ariston serial no. 402127944. difficult to send module off as it is in a holiday home and needs to be sorted quickly.
    Thnx Allan

    July 11, 2007 at 6:41 pm in reply to: AEG Dishwasher switch bank #218502
    allan
    Participant

    Re: AEG Dishwasher switch bank

    Thanks, thought I had tried that must have missed a digit out, all ok now cheers.
    Allan

    July 11, 2007 at 6:34 pm in reply to: AEG Dishwasher switch bank #218500
    allan
    Participant

    Re: AEG Dishwasher switch bank

    Hi again Chris, the pnc no. is 91182505900, have tried looking up on connections but cant bring anything up for the part no. any ideas?
    Regards Allan

    July 6, 2007 at 8:07 am in reply to: Hotpoint Tumble dryer squeak #218673
    allan
    Participant

    Re: Hotpoint Tumble dryer squeak

    Cost of the drum will just about write this machine off! good old Hotpoint or should I say Indesit or whatever they call themselves now! how depressing it is having to work on crap all day, time for a career move me thinks!!!!

    June 27, 2007 at 5:26 pm in reply to: Hotpoint Tumble dryer squeak #218671
    allan
    Participant

    Re: Hotpoint Tumble dryer squeak

    Yes, it definatly is.

    June 27, 2007 at 2:09 pm in reply to: Hotpoint Tumble dryer squeak #218669
    allan
    Participant

    Re: Hotpoint Tumble dryer squeak

    Yep put washer on as instructions said, earth strip seems fine, the squeak is intermitent but is coming from back bearing and shaft

    June 26, 2007 at 8:35 pm in reply to: AEG Dishwasher switch bank #218499
    allan
    Participant

    Re: AEG Dishwasher switch bank

    Thanks chris, customer having problem finding the pnc no. thinks it has been rubbed off, will have a look myself!
    Thanks again
    Allan

    June 6, 2007 at 5:45 pm in reply to: Samsung Fridge Freezer #216058
    allan
    Participant

    Re: Samsung Fridge Freezer

    Hi Bryan and thanks for the reply, have asked the customer to holt top two buttons in for ten seconds as you advised, and have 88 88 on display
    Thanks again.
    Allan

    June 1, 2007 at 7:34 pm in reply to: Bosch WFK 5730 #215694
    allan
    Participant

    Re: Bosch WFK 5730

    Thanks, much appreciated

    March 28, 2007 at 7:21 am in reply to: Zanussi fjs1225w #209045
    allan
    Participant

    Re: Zanussi fjs1225w

    Thanks for the replies, no its in the kitchen, will check facia board, I would have thought if it was a door interlock you would have to reset program?
    Thanks
    A

    February 8, 2007 at 8:08 pm in reply to: Zanussi bearing kit #203678
    allan
    Participant

    Re: Zanussi bearing kit

    Thanks, cant say I blame you ❗

    February 8, 2007 at 7:31 pm in reply to: Zanussi bearing kit #203676
    allan
    Participant

    Re: Zanussi bearing kit

    Hi again Chris mainly deal with Connect and Qualtex cant find that seal on them any ideas?
    Thanks Allan

    February 8, 2007 at 7:14 pm in reply to: Zanussi bearing kit #203675
    allan
    Participant

    Re: Zanussi bearing kit

    Thans Chris 😀

    January 23, 2007 at 9:51 am in reply to: Hotpoint wmtl79 belt? #201987
    allan
    Participant

    Re: Hotpoint wmtl79 belt?

    That will do fine muchos thankos 😀

    January 22, 2007 at 8:41 pm in reply to: belling 600x dual ceramic element #201813
    allan
    Participant

    Re: belling 600x dual ceramic element

    Thanks Chris 😀

  • Author
    Posts
Viewing 15 posts - 166 through 180 (of 200 total)
1 2 3 … 11 12 13 14