Forum Replies Created
-
Posts
-
Re: Zanussi FJ1354s start/pause light flashing!! Help.
Hi Chaps! Further to this, If i start the machine with the motor disconnected, it starts fine. If i disconnect motor and skip to spin, machine door locks and starts fine doesnt throw up any fault code initially. If I connect motor, skip to spin, door lock locks start pause light flashes, if i press startnothing happens, start light continues to flash. Any ideas!!
Re: Hoover Logic 1300E (A3764-301) not spinning
Just as an after thought,(its quite a while since ive seen one of the proper made hoover machines). Seem to remember problems with tacho connections on wiring harness to motor! Try crimping the connections on motor plug and wiring harness to motor plug! Also check that wiring harness isn’t damaged where it clips underneath concrete block! Probably goes without saying, but i’ll say it anyway, make sure there is no power on when crimping connections.
Andy Stuart
Re: Indesit WIL 133
Hi guys! Thanks for your input. Turned out to be a board!! No surprise with good old merloni. EMW sorted it as usual.
Thanks again.
P.S. Great concept, this website!!!
Re: Bosch washing machine problem with powder staining.
Unfortunately so!!! We lost Dad a couple of years ago to the dreaded “C”. And your right, he was a very nice bloke, but very nice of you to say so!!. Fortunately he set up a good little business which I have now been running for approx 15 years, my brother now works with me aswell. Fingers in all sorts of pies, as you have to these days to survive. I was lucky enough to work with Dad for 8 years or so, so got a good grounding. Good to hear from you Andy. I can be contacted at info@stuartdomestics.co.uk
I’ve checked out your website before actually. Great site. Very helpful
Keep in touch.
Andy Stuart
Re: Bosch washing machine problem with powder staining.
Hi Andy! Don’t worry Ive covered all the bases on that score. Ive warned her that a new machine is not neccesarily going to cure the problem. I’ve given her the advice about how much powder to use, How much washing to put in etc, etc, etc. She is just convinced that she is ready for a new machine. I even tried to get her to buy a machine elsewhere(odd I know, but I was thinking the same as you, is this one going to come back and bite me???) But she’s an old customer and refuses to go anywhere else. She was even a customer of my dad’s before me( Who incidently Andy, I think you worked with for a while at “ERIC WILDS” Authorised Hoover Dealer. My dads name was Des Stuart. Some while ago now!!
Re: Bosch washing machine problem with powder staining.
Im sure you are right, but you know what customers are like, when they’ve made their minds up that it’s the machines fault, how do you convince them otherwise. We’ve all heard it before: “I’ve been washing for 30 years, don,t you think I know how to wash by now”. (The customer is always right as they say).
