bazofstour

Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • February 6, 2015 at 2:10 pm in reply to: Hotpoint Condenser Drier #424450
    bazofstour
    Participant

    Re: Hotpoint Condenser Drier

    Many thanks, it’s a 7mF capacitor.

    February 6, 2015 at 8:47 am in reply to: Hotpoint Condenser Drier #424448
    bazofstour
    Participant

    Re: Hotpoint Condenser Drier

    Do you stock this item, or could you point me in the direction please?

    February 5, 2015 at 5:27 pm in reply to: Hotpoint Condenser Drier #424446
    bazofstour
    Participant

    Re: Hotpoint Condenser Drier

    That seems an easy fix.Are you sure?

    April 13, 2013 at 11:40 am in reply to: Bosch Max WFL2000 no spin #392978
    bazofstour
    Participant

    Re: Bosch Max WFL2000 no spin

    Brushes changed, machine now fully functioning.Thanks again!

    March 30, 2013 at 7:57 pm in reply to: Bosch Max WFL2000 no spin #392977
    bazofstour
    Participant

    Re: Bosch Max WFL2000 no spin

    many thanks for help and tips.will let you know when I’ve changed brushes next week!!

    March 29, 2013 at 6:14 pm in reply to: Bosch Max WFL2000 no spin #392974
    bazofstour
    Participant

    Re: Bosch Max WFL2000 no spin

    Have ordered new brushes from your parts dept. Does motor need to come out to replace these. I have removed one brush from motor ok and it is worn. Also is the motor held in by two bolts only?

    March 29, 2013 at 2:31 pm in reply to: Bosch Max WFL2000 no spin #392972
    bazofstour
    Participant

    Re: Bosch Max WFL2000 no spin

    would the motor brushes affect the wash process as well as spin?

    October 10, 2011 at 9:17 am in reply to: Indesit IS60V #360940
    bazofstour
    Participant

    Re: Indesit IS60V

    Thanks to both of you! Will check play on drum bearing, and if worn will order kit listed in your spares, and change at same time as belt! Am going to improvise tool for fitting belt!! he says!!

    October 10, 2011 at 8:46 am in reply to: Indesit IS60V #360937
    bazofstour
    Participant

    Re: Indesit IS60V

    😕 Were you referring to the Drum bearing?

    October 10, 2011 at 8:11 am in reply to: Indesit IS60V #360935
    bazofstour
    Participant

    Re: Indesit IS60V

    Many thanks! Your right,was replacing panels after removal just in case the whole thing collapsed and must have missed it.Found it now.Does front have to be removed completely or just loosened? With no belt on, fan clatters the rear panel.will this go when the new belt is on,or has bearing worn?Belt hadn’t snapped but was hanging by a thread.

    January 16, 2010 at 7:29 pm in reply to: Diplomat ADM 8542- not working #308933
    bazofstour
    Participant

    Re: Diplomat ADM 8542- not working

    Could you tell me the location of the main PCB please? Will check other components tomorrow.Suspect door catch, door would not open for quite a while after power was switched off. Will check element and any accessible components, but without cct diagram this involves lots off guess-work. Might end up buying a Bosch! Many Thanks anyway.

    July 7, 2006 at 12:52 pm in reply to: dishwasher element #180857
    bazofstour
    Participant

    Element tested ok! Found reset button.Many thanks.

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)