[biggoolie]

Re: Zanussi wdj1500

Yes, checked brushes and metered out.

[biggoolie]

Re: BEKO WMA510

Checked all usual suspects, connections, motor. heater, etc. Going back with module tomorrow, so will see what happens.

[biggoolie]

Re: BEKO WMA510

Child lock? I did’nt know it had one, motor wiring checked out o.k.

[biggoolie]

Re: BEKO WMA510

Hi, if you mean was the door locked, no it was’nt, the door was open.

[biggoolie]

Re: Tricity Bendix EW1200W

Thanks for the file Chris, printed off all 63 pages !!, going back tomorrow so at least I,ll be armed and ready,cheers.

[biggoolie]

Re: SERVIS M6005

Sometimes the lid has three long screws, one at each corner, and one in the middle. Lid then lifts straight up at the back until the front edge unhooks itself. Still remember the first time I went to one of these, felt a right twit trying to get the thing off.

[biggoolie]

Re: Servis M9412w Module Plug

Thanks for the advice, you were right about the plug connections, interlock and heater were ok. Cheers

[biggoolie]

Re: Hoover A3790 Indicator Drum

Thanks for the response, I’ve not used Masterpart in the past, I’ll give it a try, thanks a bunch.

[biggoolie]

Re: LG WD12126RD Washer Dryer

Thanks for the advice, I’m going back today and I’ll check what you’ve told me, cheers!.

[biggoolie]

Re: LG WD12126RD Washer Dryer

I checked the error codes shown in the new Whitegoods handbook, it shows error code LE as an interlock fault, but in the customers instruction manual it says it’s a motor fault. It is the motor that is at fault on this machine, but not having any experience on this type of motor before, I was hoping someone had any imformation before I start ordering stator or rotor parts.

[biggoolie]

Re: Zanussi FLE1215W

I checked the wrong inbox, recieved the documentation for that range of machines,thanks for your help.

[biggoolie]

Re: Zanussi FLE1215W

There is no display on this model, just the bank of l.e.d.’s at the right hand side, and the rows of lights indicating programs and options. As to the diagnostic sequence, I do’nt know this procedure. In reply to fennyaps, there is nothing in my inbox.

[biggoolie]

Re: Whirlpool AWZ410-4 Washer/Dryer

Thanks a million komrad, will send off for module.

[biggoolie]

Re: Zanuusi ZJD1285

Thanks for the heads up, I’ll try Tony and see what happens.

[biggoolie]

Re: Zanussi FL1084 Programmer

Thanks for the info. I will contact Tony tomorrow for a shipping address for this timer, cheers.

[Author]

Posts