[bro1]

Re: wil 163 flashing

they flash as soon as i chooses a cycle,i have give it a visual and all looks ok,no blow capacitors or nothing,it weird as i checked the carbon brushes i think they are called and they need replacing,i just pulled them out a bit to get it going to make sure it was only them i needed

[bro1]

Re: samsung rsh1dtmh1/xeu problem

thanks for the info bryan,forgot to say aswell i put back together without plugging the thermal trip back in ~(if thats what its called,it has been on for a good while now and the fridge part is cold,freezer part is normal,my understanding is it may start to freeze up again

[bro1]

Re: WHIRLPOOL 6TH SENSE AWM 8103/1 error

cheers for the info spindoctorlove
will go there in the week and try it then report findings

mucho gracias

[bro1]

Re: WHIRLPOOL 6TH SENSE AWM 8103/1 error

i have taken the pipes and pump of to make sure all is clear,then i put it on a rinse and spin,it rinses and drains ok but then instead of going onto the spin cycle it gets the fh error ,if it is the pressure switch have you got a link to what it looks like and how much it cost,she was told over the phone the washer just needed resetting ?

thanks for your help

[bro1]

Re: WHIRLPOOL 6TH SENSE AWM 8103/1 error

odom wrote:FH is water fill timing out. Check the pipes aren’t kinked and you have adequate water pressure. If this is okay, it’s likely the pressure switch is blocked, or that the drain hose is too low and water is siphoning out.

just one last question as i probably will be going to look at it tomorrow or tuesday,where roughly is the pressure switch located

thankyou

[bro1]

Re: WHIRLPOOL 6TH SENSE AWM 8103/1 error

jst one more quick question,she was talking to someone on the phone and they said it needs resetting but wouldnt tell her how,just said they would have to send an engineer out,how do you reset it,thanks

[bro1]

Re: WHIRLPOOL 6TH SENSE AWM 8103/1 error

odom wrote:FH is water fill timing out. Check the pipes aren’t kinked and you have adequate water pressure. If this is okay, it’s likely the pressure switch is blocked, or that the drain hose is too low and water is siphoning out.

cheers for that odom,will tell her to check that thanks 😀

[bro1]

helo_75 wrote:yes its the capacitor

http://shop.ukwhitegoods.co.uk/Tumble+D … citor.html

is what u need

side panle off, situated next to motor

make sure u unplug it !!

thanks for the info mate,,much appreciated 😀

[bro1]

Re: HOTPOINT VTDOO

cheers i guess it would be better getting the whole kit to make sure

thanks

[bro1]

Re: HOTPOINT VTDOO

cheers for the reply kwatt that answer is good enough for me,,,,will order no

mucho gracias 😀

[Author]

Posts