[ceedy]

Re: ISE Ci555 leaky

All now sorted .. no leaks and quiet with a new pump .
My only slight moan is the quality of the parts in the machine, considering its not a 200 quid cheepy , its defin built down to a price , with fairly low quality plastic inj mouldings. and so many sharp edges 😥 😉

But hey it works .. and pretty reliable

I’ll disappear until the next breakdown 😳 😉 ..

take care All .

C

[ceedy]

Re: ISE Ci555 leaky

Martin wrote:Too much info here Chris. This is a public forum after all.

Can’t see anything worrying ?? my order number is of little use to anyone?.. and the Shop phone no is public ? other than that ? ..

but trimmed it a bit anyhow . 😉

C.

[ceedy]

Re: ISE Ci555 leaky

yup, this ..

quote .

Dear chris xxxxxxxx ,

Your order # ???????? has been
Dispatched By Royal Mail.

also I’ve never accesed the site from work before so had to ask for the password :rolls: , done this 3 times and still got no linky to reset it ?

😆

Chris

[ceedy]

Re: ISE Ci555 leaky

While sat having a cuppa and waiting for the postie this Morning.. .. got an email update ..

only just posted today?? .. more earache then !! . :rolls:

Chris

[ceedy]

Re: ISE Ci555 leaky

Martin wrote:Tub out in the garden then fire up the jet washer! Result :tup:

Does that mean I ‘ve got to buy a jet washer as well then ?? 😆

C.

[ceedy]

Re: ISE Ci555 leaky

iadom wrote:You need to read THIS 😉

Ahh.. another page … been looking at loads of other peeps ways of cleaning out gungy bits … and all the various concoctions to clean things out . 😉

Some of ours needed a good poking to shift and left the other odd bits soaking while waitingfor the part to arrive. ..

cheers

Chris

[ceedy]

Re: ISE Ci555 leaky

exactly what i’ve done.. 😳

Spent more time cleaning out all the moulding recesses of goo/gunk/scale . 😆

C.

[ceedy]

Re: ISE Ci555 leaky

Piece of Peewee to work on innit… 😉 😳

Reckon will have a peek at the motor brushes while its in bits 😉

Chris

[ceedy]

Re: ISE Ci555 leaky

Got a seal and pump ( a bit rattley) on Order..

C.

[ceedy]

Re: ISE Ci555 leaky

Is this seal even slightly visible for mthe outside. 😉

As just looking at ours, unless the seal is microns thick? 😆
I can’t see one there??

Quite a bit of grey cruddy residue around the joint line in odd places

Cleaned up and can’t see any cracks visible.

already Sussed out how it comes apart. 😳

Anyone used addition/alternative methods of sealing ?
got rather a lot of stuff, from my years keeping a 36 yr old Fiat X1/9 alive and on the road 😆

Chris

[ceedy]

Re: ISE Ci555 leaky

Thanks for that ..

It only seem to leak during certain cycles,
the ones when I’m not sitting watching .. :rolls:

wondering whether its actually a Crack somewhere around the motor LUG that opens up when the motor is loaded..

getting stuck in today , as too busy yesterday .with school and MOT’s.

Oh ! the pressure from her ?? 😆

Silly question but worth asking before 😳 … is there a sequence of panel removal to get in ?.
Does the front panel just come off for access ?, will found out though when I get in there . our wash room is bit small so got limited access.. 🙁

thanks

Chris

[ceedy]

Re: ISE CI555WH problem

Smarty pants !!! 😕 😀

Brushes it was …

many thanks.

Chris

PS, ,See you all at the next failure.. 😳

Off to try to get a leylandi tree out of daughters garden :eeek:

[ceedy]

Re: Our ISE Washer getting to the end of its warranty

Not long after starting this thread.
I actually walked past our washroom , whilst the ISE was running, its not often on in the evenings.

Thinks!! that sounds a bit noisy !! Open the door and eeek!! never heard anything quite like it ..

That rather loud I though !? then it swtiched on to faster spin and it could drown out a Space shuttle launch .. 😀 😀

Shut door quick & walk away !! 😉 😉

Waited til it had finished its cycle , and ooer there’s play
in the drum bearings, quick dash to the paperwork folder. phew ! still in warannty, so it being taken away today to sort out.

So..

Any recomemndations for an extended warranty company that doesn’t have too many crippling clauses and doesn’t want to awrite off the machine the first time it goes caput!! 😉
( domgen )

byzz

Chris

[ceedy]

Re: Domestic Appliance Horror Stories ?

Smeg Dishwasher bought with 5 yr warranty ,

After about 18 months the handle fell off. ok not much .
Then the Door came loose .. hmm.

Then a power switch button broke .could not switch it on :cry:.. and then it all went dowhill from there .

Got serviceman out, actually Seems Smeg only employ independent service engs. In my case a Shop from Devon, ( 50 odd miles away) So they only came over when they fancied or had others to do in the area. ( 2 weeks intervals all the time).
So 2 weeks( & many calls to smeg) after we reported the button problem
NB .I had told them exactly what the problem was and exactly what part was needed. Bloke turned up pulled it all to bits and said button broke ( :rolls: ) need to replace whole control unit 😯 … need to order the parts. went away.
2 weeks later ( & many calls to smeg) another man appears,
seems the parts had to come from italy ?.
Plugs in new module, large bang and flash from under the machine . looks again says it the wrong module 😯 😯 ..
Clears off .. more calls to smeg.
2 weeks later first bloke appears pulls it apart says looks like motor is gone , wants to report the machine as unservicable arggh!!! . clears off.
More calls to smeg, 2 weeks later diiferent mans turns up with a complete door ??. wot!! leaves door & goes away again.

After more calls to smeg I finally get them to admit the machine is a duffer and needs to be replaced. in the mean time the 2nd repairman turns up to repair it again ?. :rolls:

I get back to smeg to see what going on and after a wee chat they deny they agreed to the replacement, was a different person this time. after me exploding over the phone .. surprised I lasted this long !! .. they go back over they telcon recordings and all credit to them they admit it was promised.
So 10 days later a new machine turns up, with a wonky door..
but does work.
After the standard 2 weeks .. repair man from another company
appears and fits the door left during a previous visit.
I insisted the first company never came here again.

So about 3 months without a dishwasher. nightmare.. 👿

I even had to fight to get smeg to reinstate my 5 yr warranty on the new machine , they wanted the old warranty to run on .
But its ok at the moment .. !

C.

[ceedy]

kwatt wrote:Still no email.

It’s hard to track if we don’t know what we’re tracking. 😉

All the spares are in stock in the UK so there should be a 24/48 hour turnaround.

K.

All resolved now , took a while , didn’t send any email as we couldn’t get the info from the shop, and more importantly It all got sidelined, when our lil grandson got knocked down by a cyclist.
so washing was a least inportant at the time.

But washer now ok and lil fella is getting that way .

C..

[Author]

Posts