[chojin]

Re: Candy CIC 60 Tumble Dryer

cheers for the post. Sorry for not replying sooner I forget I posted here :rolls:

The machine has been off for a while, so it has had no chance to have any condensation to build up. I will give it a try tomorrow morning now its had chance to dry.

Its been hell trying to dry stuff around the house.

PS

Is there no section for Central Heating Boilers ???

[chojin]

Re: Indesit WG1034T Wont Drain

Well Martin. Took Half a day today from work to have a look after your advice. Was a bit of a monster to get down my kitchen step, but it came down with a MONSTER bang 😈

Turned it on its side and disconected the hoses and use my garden hose to jet up the pipes. Nothing major came out, but it may have been just soap scum. Reconected everything destroyed my kitchen step getting back in 😕 ( i was using a sack truck)

Well its in and draining 😆 and spinning so all is looking good 😀 . Not sure if it was the cleaning or the MONSTER bang that did it 😆 . So fingers crossed the cycle finishes.

Thanks

[chojin]

Re: Indesit WG1034T Wont Drain

OK cheers for that. I will have a ganders tonight. I need to get it outside as its full of water :rolls:

[chojin]

Re: Indesit DI67 Not Taking the tablet

😀 😀 😀 W000000TY W000000000 😀 😀 😀

Well it worked, thanks for the help guys / gals between us we worked it out.

[chojin]

Re: Indesit DI67 Not Taking the tablet

Well my basket is on its top setting, but I have an inquizative / logical brain think it comes from my back ground from a fully qualified machanical engineer and a IT Pro.

I started looking at the interior and the shape of the basket and spotted the shape of the baskets matches the shape of the tablet door. My wife had fitted one of those Finish keep your dishwasher smelling nice things and it was hanging on the inlet / clearance where the tablet door supsed to open into.

So using the info from gegsy about the door opening during the cycle, i belive that smelly thing was stopping the door (seems logic to me).

So anyway, filled the machine up stuck in a tablet MOVED the smelly thing and now its wait and see…..fingers crossed 😉

[chojin]

Re: Indesit DI67 Not Taking the tablet

I have taken the spray arms off and they were / are clear, so I washed then out anyway with water and steam.

The tablet door on my machine opens when I open the main door after the cycle has finished and thats when the tablet drops out, so it could be my tablet door release is not working fully.

The catch releases but the door door does not open fully….hmmm

I put it on another soak wash to look at the spray arms, they are moving but its dificult to tell how fast as they with half a second of the door opening they stop, but water is shooting out of the machine when i open it.

[chojin]

Re: Indesit DI67 Not Taking the tablet

🙁

Well cycle has just finished. I opened the main door, the tablet door opened and a soggy tablet dropped out.

Is the tablet door supposed to open during the cycle?

[chojin]

Re: Indesit DI67 Not Taking the tablet

Thanks for the quick response

I tried the soak option and after 2 mins the water level was JUST and i mean JUST below the top of the Salt screw on lid.

EDIT

I have also used a small steam cleaner to jet all the Spray Jets and jetted the tablet door hatch.

I will try a load and see what happends

[Author]

Posts