UK Whitegoods

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 16 total)

1 2 →

Author

Posts
December 2, 2009 at 8:29 am in reply to: BOSCH WTE6920 GB 04 CONDENSER WARNING LIGHT ON #305425

CHRIS24
Participant

Re: BOSCH WTE6920 GB 04 CONDENSER WARNING LIGHT ON

Thanks for that that was the first thing i checked and by removing tube from top of pump and blowing through confirmed ok from pump to water container.

May 28, 2009 at 10:12 pm in reply to: HOTPOINT WT540 FLASHING LIGHTS #288053

CHRIS24
Participant

Re: HOTPOINT WT540 FLASHING LIGHTS

13 months

March 16, 2009 at 12:12 pm in reply to: hotpoint wf 340 flashing lights #280388

CHRIS24
Participant

Re: hotpoint wf 340 flashing lights

Many thanks for that would that fault code be in the book sold by UK WHITEGOODS and is there any fault codes for Bosch machines in there

Chris

March 16, 2009 at 8:45 am in reply to: hotpoint wf 340 flashing lights #280386

CHRIS24
Participant

Re: hotpoint wf 340 flashing lights

from top 1 3 4 and on off

January 30, 2009 at 9:32 am in reply to: CREDA W220VW NO SPIN #275648

CHRIS24
Participant

Re: CREDA W220VW NO SPIN

Thanks for the link , the machine will not spin even when the drum is empty is it posible the out of balance part of the control module is faulty.

Chris

January 6, 2009 at 9:38 am in reply to: HOTPOINT TUMBLE DRIER VTD00P BELT CHANGE #272947

CHRIS24
Participant

Re: HOTPOINT TUMBLE DRIER VTD00P BELT CHANGE

thanks for the advice belt ordered will fit tommorow.

Chris

November 26, 2008 at 11:12 am in reply to: awo/0 4505 service light flashing #269575

CHRIS24
Participant

Re: awo/0 4505 service light flashing whirlpool

sorry forgot to say its a whirlpool

October 24, 2008 at 8:50 am in reply to: creda 481317 timer/control unit #266392

CHRIS24
Participant

Re: creda 48317

sorry i gave the wrong model number the correct one is 48317

October 7, 2008 at 10:44 am in reply to: Zanussi TC7102w drive belt #264142

CHRIS24
Participant

Re: Zanussi TC7102w drive belt

job done , easy when you know how , slight problem getting belt over wheels at front other than that pretty straight forward.

Once again many thanks

October 7, 2008 at 10:24 am in reply to: zannussi washer drier wjs1265w #264321

CHRIS24
Participant

Re: zannussi washer drier wjs1265w

many thanks one on order

October 4, 2008 at 8:36 am in reply to: Zanussi TC7102w drive belt #264141

CHRIS24
Participant

Re: Zanussi TC7102w drive belt

Many thanks will give it a go over the weeknd.

September 10, 2008 at 8:45 am in reply to: Bosch sgs0902gb09 will not start #262159

CHRIS24
Participant

Re: Bosch sgs0902gb09 will not start

Is there any way of telling which one it is or could it be both.Is there any test procedure i could carry out

September 9, 2008 at 10:48 am in reply to: indesit washing machine Wia111uk on off light flashing #261982

CHRIS24
Participant

Re: indesit washing machine Wia111uk on off light flashing

STRIPEY
Please READ my comments and the other peoples comments the lights continue flashing even when the dial is turned to the off position which they should NOT

September 9, 2008 at 8:15 am in reply to: indesit washing machine Wia111uk on off light flashing #261980

CHRIS24
Participant

Re: indesit washing machine Wia111uk on off light flashing

Many thanks to all i will switch it off at wall and hope for best as new module approx £100

Chris

September 2, 2008 at 5:30 pm in reply to: AEG 1271 sensormatic – very loud spin cycle! #261506

CHRIS24
Participant

Re: AEG 1271 sensormatic – very loud spin cycle!

sounds like drum bearings
Author

Posts

Viewing 15 posts - 1 through 15 (of 16 total)

1 2 →