clayside

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 362 total)
1 2 3 4 … 23 24 25
  • Author
    Posts
  • January 13, 2014 at 7:17 pm in reply to: Miele oven H340-2BP #407525
    clayside
    Participant

    Re: Miele oven H340-2BP

    Hi Mervin,
    Thermistor that fits into top element? if so part no 5160202
    Regards
    clayside

    January 13, 2014 at 11:59 am in reply to: Neff V8320X0GB/01 FD 9005 #407517
    clayside
    Participant

    Re: Neff V8320X0GB/01 FD 9005

    Sorry Martin, should be V6320X0/GB/01. Monday morning 😀

    January 4, 2014 at 6:55 pm in reply to: Bosch SHV55MO3GB/56 #406905
    clayside
    Participant

    Re: Bosch SHV55MO3GB/56

    Spot on Paul, the machine was removed from housing to get to a pluming fault behind it and the screws not been screwed up tight. When I first spoke to them not a word about machine being moved until I questioned them. Thanks, you and Martin saved me a wasted trip. Clayside

    January 3, 2014 at 3:45 pm in reply to: Bosch SHV55MO3GB/56 #406903
    clayside
    Participant

    Re: Bosch SHV55MO3GB/56

    Thanks Martin,
    Will have to go down over weekend and look at the beast.
    Regards
    clayside

    January 3, 2014 at 12:22 pm in reply to: Bosch SHV55MO3GB/56 #406901
    clayside
    Participant

    Re: Bosch SHV55MO3GB/56

    Hi ,Martin,
    Yes she tried reset, don’t think base is flooded as she says when door opened at end of programme drain pump not running ( no noise from machine) Not had one that jumps from auto or quick wash to prewash light after aborting programme. If say a quick wash is selected machine fills and pumps then after approx 5-7 minutes programme is stopped. Machine is as usual with funny faults 50 miles from me and is a friend.

    January 3, 2014 at 9:25 am in reply to: Bosch SHV55MO3GB/56 #406899
    clayside
    Participant

    Re: Bosch SHV55MO3GB/56

    Will this model show fault codes via programme indicator lights?

    December 3, 2013 at 5:38 pm in reply to: Miele dishwasher G858SCVIPLUS3 #405604
    clayside
    Participant

    Re: Miele dishwasher G858SCVIPLUS3

    Hi Merv,
    Heater part no 5595870. Very rare for these to go
    Clayside

    December 1, 2013 at 10:09 am in reply to: Siemens HB56M550B/10 FD 8804 #404993
    clayside
    Participant

    Re: Siemens HB56M550B/10 FD 8804

    Any help please. Have fitted temp sensor it is still over heating intermitently, checked top and bottom elements both ok.

    October 13, 2013 at 2:11 pm in reply to: Idiot been paying D&G for 23 years! #402753
    clayside
    Participant

    Re: Idiot been paying D&G for 23 years!

    Had a customer who was still paying for his TWO old dishwashers that had been written off by D&G. They gave him refund.
    clayside

    August 15, 2013 at 7:30 pm in reply to: Miele WT2670 #399455
    clayside
    Participant

    Re: Miele WT2670

    Part no 7544390 door seal.
    Regards
    clayside

    June 20, 2013 at 5:26 pm in reply to: Siemens SN66T091GB/11 #394674
    clayside
    Participant

    Re: Siemens SN66T091GB/11

    Sorry not replied before customer been on holiday.
    It was heat/circ pump, the rotor was being pulled over towards stator causing pump to slow down. Now it’s up and running again.

    June 10, 2013 at 8:17 pm in reply to: Stentorfield Vision Vending Machine #396125
    clayside
    Participant

    Re: Stentorfield Vision Vending Machine

    :con:

    May 17, 2013 at 6:15 pm in reply to: Siemens SN66T091GB/11 #394672
    clayside
    Participant

    Re: Siemens SN66T091GB/11

    Anyone got any info on these please.
    Clayside

    May 15, 2013 at 6:39 pm in reply to: Siemens SN66T091GB/11 #394671
    clayside
    Participant

    Re: Siemens SN66T091GB/11

    Can anyone help please, thinking it may be sticking non-return valve, but machine was empty of water?

    May 15, 2013 at 7:17 am in reply to: Siemens SN66T091GB/11 #394670
    clayside
    Participant

    Re: Siemens SN66T091GB/11

    Customer just emailed, it’s been ok for a week, now showing E24 and will not do any programme. How do you get non-return valve out of this, have checked drain, circ pumps and drain hose etc. last week and both clear? Thinking E24 is drain fault. Any help please.
    Clayside

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 362 total)
1 2 3 4 … 23 24 25