Forum Replies Created
-
Posts
-
Re: Dead WFL2260 after changing brushes
Nope, you must be looking at another thread. My drum was aok – freely rotating- before and after brush change.
Moreover, no power would be applied to the drum, ’cause no program was started.
Jim
Re: Dead WFL2260 after changing brushes
They were the right way round that’s definite – I checked.
It fried on power up even though I hadn’t started a prog.
do you think there’s been a short to earth somewhere in the brush assy?
Re: Stoves 900GTF Oven – unstable main oven flame
We had one of these ovens at our last house.
Our problem came to light when the newly installed carbon monoxide detector kept on going off after having the oven on for 15 mins or so.
We called out a Stoves engineer (under warranty at the time), and it seemed that the door seal was not being effective, with the result that the flame was lifting off the main burner and creating carbon monoxide.
He fitted a new seal – flame burned properly and no carbon monoxide.
If this is what’s happening with you – suggest you get it seen to quick.
