Forum Replies Created
-
AuthorPosts
-
cornwell40
ParticipantHad a few timers go on these, two sticking and one heater related.
cornwell40
ParticipantSorry for no reply, customer got arsey cos I didn’t have an instant response so I sacked him;)
cornwell40
ParticipantDoes anyone have a manual for this model. Got two more reporting same fault. Seen the fault after 10mins on one failed a few times. Screen gone blank turn knob to next setting screen back on but 0.00 on every programme. Turn off and back on prog. times shown, press start screen off. Dis this about six/seven times. By time I pulled machine out and took top off and it works perfectly. Two other reported ones seem fine on test. This one is really starting to get at me.
cornwell40
ParticipantReported fault was cuts out on dry but because IG never got to see this one.
cornwell40
ParticipantWent to two of them doing the same thing on Friday. Turned off the bluetooth(straws and clutching) one of them hasn’t done it since(intermittent coincidence??) and the other is the same. Sometimes goes all the way through dry sometimes cuts after 10 mins others an hour.
Found out yesterday Beko have been out to a Blomberg wd we supplied in June last year so IG. A list of 8 parts were fitted before an uplift was arranged
cornwell40
ParticipantYep socket fine, same fault is happening on two machines in different rooms.
cornwell40
ParticipantHeater box components definately as they’re open connectors but can’t get to anywhere else to test as it’s packed like a sardine tin with closed connectors. I’d love to get one in a workshop to test but the washer is used constantly and up on 2nd floor.
cornwell40
ParticipantSorry for late reply Dave, been full on. This fault happening intermittently and I’ve only seen it happen on one of the machines. They’ve got loads
.
No resistance/earthing issues when fault occurrs. Problem is on these when the machine goes of (or plug out) it resets to start and doesn’t do it the second, third etc time. One thing I noticed is that the neutral dissappears when the fault occurs. When the machine Spins on the dry cycle is where I saw it happen around 15 minutes in which is where the tenant saw it happen. Pulling my hair out on this one cos it’s a big client with assisted living houses and because of the nature of the place there’s no real info from the customer. Any tech info on these would be appreciated.Cheers.
cornwell40
ParticipantCheers Dave, difficult place to do disconnect tests as this ones in the main office with people in and out all the time. Might have to get my oppo to be a bouncer on the door for an hour……..y’aint coming in;)
cornwell40
ParticipantJust found the original pia retainer isn’t available, the older one is.
cornwell40
ParticipantRegular issue, usually tell them to get a gas man round to sort the gas elbow out.
cornwell40
ParticipantI think, hopefully, he’s seen sense and left it. He’s not been back to me since.
cornwell40
ParticipantHe was ready to get the pcb from espares, even when I told him the price:o, barmy.
cornwell40
ParticipantYou’re a proper Gent Dave, and no mistake:D
cornwell40
ParticipantExact same issue with one over here. One of the inverter motors, any outcome on this one?
-
AuthorPosts
