crisiebabe

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 8, 2006 at 6:17 pm in reply to: Faulty Hygena AHY 8122 #168776
    crisiebabe
    Participant

    Re: Faulty Hygena AHY 8122

    Dave
    Thanks for the resonse.
    The water did seem to come out when I tipped the machine. What faults are most likely. I don’t mind having ago myself, as I do have an engineering back ground.
    Thanks
    Chris

    December 16, 2005 at 6:32 am in reply to: Flashing Lights on Hotpoint WF210G Aquarius #157902
    crisiebabe
    Participant

    Re: Flashing Lights on Hotpoint WF210G Aquarius

    Thanks Dave. As you can imagine my confidence in this machine is really low now. I hope this isn’t a sign of things to come. I’ve only had the machine about 10 months & had two separate problems.
    Engineer is coming on Wednesday.
    Thanks Again

    Chris

    December 14, 2005 at 8:00 pm in reply to: Flashing Lights on Hotpoint WF210G Aquarius #157900
    crisiebabe
    Participant

    Re: Flashing Lights on Hotpoint WF210G Aquarius

    This also happens if I select ‘pump out’ cycle. After a few minutes on/off button flashes rapidly and Reduce creases & Time saver buttons flash slowly.

    Chris

    October 6, 2005 at 7:11 pm in reply to: Hygena AHY 8122 Fault #149441
    crisiebabe
    Participant

    Re: Hygena AHY 8122 Fault

    Many thanks, after a quick investigation it is the switch. Searched quite a few sites for a new switch but can’t find one specifically for my hygena. Found one that looks the same but says it’s for a line of ARISTON dishwasher’s is this likely to be the one?
    http://shop.ezee-fix.co.uk/Appliance_Sp … h_192.html

    Again many thanks for your help it really is appreciated

    Chris

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)