daisychain

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • May 10, 2009 at 3:56 pm in reply to: Choosing New W/M -Are These Any Good? #286292
    daisychain
    Participant

    Re: Choosing New W/M -Are These Any Good?

    Any others to consider, aside form the ones I am already considering? I am happy to pay more than the leaking pile of poop Hotpopint I bought 5 months ago.

    May 10, 2009 at 3:28 pm in reply to: Choosing New W/M -Are These Any Good? #286290
    daisychain
    Participant

    Re: Choosing New W/M -Are These Any Good?

    Sorry, can’t seem to edit, should read ‘what is a SPLIT drum’

    May 10, 2009 at 3:26 pm in reply to: Choosing New W/M -Are These Any Good? #286289
    daisychain
    Participant

    Re: Choosing New W/M -Are These Any Good?

    Thanks Jim, are there any others you recommend? What is a spilt drum?

    May 10, 2009 at 3:12 pm in reply to: Choosing New W/M -Are These Any Good? #286287
    daisychain
    Participant

    Re: Choosing New W/M -Are These Any Good?

    Have found another one I am considering, BOSCH WAE2416SG any opinions on this one?

    May 10, 2009 at 12:33 pm in reply to: Which Washing Machine To Choose #286283
    daisychain
    Participant

    Re: Which Washing Machine To Choose

    It’s for family of 4, I like a half load option. Just want one that doesn’t leak,lol!

    May 1, 2009 at 1:17 pm in reply to: Hotpoint Aquarius WML 520 Leaking Again #285501
    daisychain
    Participant

    Re: Hotpoint Aquarius WML 520 Leaking Again

    Thnaks for your reply. I have cleaned the soap drawer and around it inside, and the roof of the drawer. I also filled the drawer over the sink and it does syphon out. It is spinning fine, and doesn’t smell.
    So looks like a new drawer is needed, I will get onto Hotpoint as it’s still under warranty.

    April 29, 2009 at 9:46 am in reply to: Hotpoint WML 520 Leaking Occasionally #285323
    daisychain
    Participant

    Re: Hotpoint WML 520 Leaking Occasionally

    PS – I have just watched the machine as it is doing a wash now, and as soon as the water goes into the fabric conditioner section of the drawer, water started leaking out. Should the pressure be turned down some more?

    April 12, 2009 at 11:32 am in reply to: Hotpoint WML520P Leaking from Drawer #282725
    daisychain
    Participant

    Re: Hotpoint WML520P Leaking from Drawer

    Thanks for your replies everyone. With the Calgon, I meant I was going to put it in the drum, not the drawer,lol.

    Touch wood, fingers crossed etc etc, my washing machine doesn’t leak, I have done 6 washes since cleaning the detergent drawer, which I didn’t think was too bad but obviously was blocked with gunk, and fiddling with the water pressure.

    So thanks very much for your help 😀

    April 8, 2009 at 10:53 pm in reply to: Hotpoint WML520P Leaking from Drawer #282721
    daisychain
    Participant

    Re: Hotpoint WML520P Leaking from Drawer

    Thanks so much for your help, I have now turned the water pressure down as well, I also think I should get some Calgon or equivalent, as when I took the drawer out some of the holes where the water comes in have limescale on them, looks like the shower head all furred up. Is it true that bicarb of soda is as good as Calgon?

    April 8, 2009 at 10:18 pm in reply to: Hotpoint WML520P Leaking from Drawer #282719
    daisychain
    Participant

    Re: Hotpoint WML520P Leaking from Drawer

    Thanks for your reply, I will try turning the water pressure down. Do you think it’s too early to phone the shop saying it’s a faulty machine?

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)