Dave_Conway

Forum Replies Created

Viewing 15 posts - 706 through 720 (of 12,426 total)
  • Author
    Posts
  • in reply to: SMEG DWI67.1 Door Hinges #192165
    Dave_Conway
    Participant

    Re: SMEG DWI67.1 Door Hinges

    They sure are 🙂

    The hinges are £29.90 each inc VAT plus £4.95 carriage, I can order if required, an email to spares@ukwhitegoods.co.uk please 🙂

    Dave.

    in reply to: Registation cards #192080
    Dave_Conway
    Participant

    Re: Registation cards

    Goatboy wrote:I was talking to Dave today

    That’ll be David then not me (the Scots don’t like shortened names so it’s Kenneth etc :rolls: :lol:)

    iadom wrote:Eat my shorts

    Ehm.. no ta if it’s all the same …. 😆

    Dave.

    in reply to: AEG oven Competence B3101-4 #192158
    Dave_Conway
    Participant

    Re: AEG oven Competence B3101-4

    It sounds like it may be related to the infamous cooling fan control unit, could you post the PNC (product code) please, normally 9?????????

    Dave.

    in reply to: aeg l76800. flashing lights #192120
    Dave_Conway
    Participant

    Re: aeg l76800. flasing lights

    PINKY wrote:Any ideas???

    Door interlock maybe ?

    Dave.

    in reply to: Hygena Cooker Hood APP2540 #192108
    Dave_Conway
    Participant

    Re: Hygena Cooker Hood APP2540

    How much ? 😯 😯

    Send me a PM and I’ll sort one for £18.99 ex VAT and a bit of postage 😀

    Dave.

    in reply to: Baumatic Refrigeration who makes it #192154
    Dave_Conway
    Participant

    Re: Baumatic Refrigeration who makes it

    Model number Kirk ? 😉

    Dave.

    in reply to: Hpt BWD12 washer drier #192122
    Dave_Conway
    Participant

    Re: Hpt BWD12 washer drier

    Failed dryer thermal fuse or thermistor I would think, both common enough problems 😉

    Dave.

    in reply to: LG GR – L207TQ #192025
    Dave_Conway
    Participant

    Re: LG GR – L207TQ

    6871JB2022A is the part number (display PCB)

    About £30 trade by the looks 🙂

    Dave.

    in reply to: Ariston AS150 Error code? #192026
    Dave_Conway
    Participant

    Re: Ariston AS150 Error code?

    1 and 4 is a software error I’m afraid 🙁

    Engineer time to be honest to rule out other possibles but it points to the PCB, the repairs@ link below should provide someone 🙂

    Dave.

    in reply to: buying a van #192033
    Dave_Conway
    Participant

    Re: buying a van

    funkyboogy wrote:whats the best way to buy a new van…

    Visit a garage or similar type premises that sell them 😆

    Sorry, I couldn’t resist that 😳

    Dave.

    in reply to: Tech info #192063
    Dave_Conway
    Participant

    Re: WMA34 Control Board config codes

    indespoint wrote:Instead of saying ensure machine is unplugged why not just say cant tell you due to the fact if you get electrocuted you may sue us

    Because it’s copyright material, simple as that.

    The Indesit company as they are now known will not take lightly to information such as this being duplicated in a public forum.

    Personal knowledge is a different matter 😉

    Dave.

    in reply to: hotpoint intergrated bwd 20…wont drain #191953
    Dave_Conway
    Participant

    Re: hotpoint intergrated bwd 20…wont drain

    Bernie may have the answer I think, air lock in the sump hose. It’s quite a long one (Matron! 😯 )

    Has it sagged in the middle, Hoover Logics used to suffer from this ? 🙂

    Dave.

    in reply to: new world cooker knob #191981
    Dave_Conway
    Participant

    Re: new world cooker knob

    You’ll need to find the 05???? or 444????? number for these now to identify spares 🙁

    Dave.

    in reply to: DIPLOMAT ADP8322 #191763
    Dave_Conway
    Participant

    Re: DIPLOMAT ADP8322

    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=102

    E2 error 😉

    Dave.

    in reply to: Hotpoint FFA91P Fridge/Freezer – Fridge Cooling Problem #191945
    Dave_Conway
    Participant

    Re: Hotpoint FFA91P Fridge/Freezer – Fridge Cooling Problem

    The fridge (and freezer) sensors are “foamed” in to the insulation and cannot be replaced 🙁

    You should be able to test continuity of the baffle motor with a multimeter and eliminate that.

    Power off when checking inside please 🙂

    Dave.

Viewing 15 posts - 706 through 720 (of 12,426 total)