Forum Replies Created
-
Posts
-
Re: Hotpoint CTD00
Replaced the relay and has not fixed the problem. another thig i have noticed is that when I press release the On/Off button it lights up (from the rear of the switch, like its shorting out)
Is there anything else I can check, Regards DeetRe: Hotpoint CTD00
Cheers for the response.
S/N 5******** so is early type. Is there anyway to test relay before I replace as it switches off immediately after release and does not run for 10 mins.
Many thanks Deet
Re: Wiring Diagram for Bosch Circulation Pump
Thank you for the response, i was unaware that was a rule.
Can you suggest where i can get the info from, do you think that if i phone Bosch they might be able to confirm?
I watched several Youtube videos on replacement of the pump on the hope that i might be able to workout the correct order but most were american and different colours.
Just dont know where/how to resolve this but would be greatful for any direction, Regards Dietmar
Re: Bosch Exxcel Check Water Light on
Thanks again for your help, Replaced the Impeller jug today and its now working fine (on a Wash now).
I hope you don’t mind if i ask another question. Does the upper Spray arm ever fail?
The reason I ask is for a number of months now I have always suspected that the Upper Spray Arm was not rotating (Any position i put it in it does not seem to move when i open the machine suddenly) and with me cleaning so many pipes and motors I can rule out any obstructions or restricted pipes. It seems to be very loose and I am wondering if it had worn from me putting metal trays on the sides and it impacting them over time (the machine is close to 10 yrs old)Again thanks for your help
Re: Bosch Exxcel Check Water Light on
Thanks for the reply, Will get the Impeller jug ordered. Im assuming there is no way to test prior to ordering?
Also i will look to clean the second item, I noticed there is alot of gunk/scale around that area.
Am i understanding this correct that the Impeller Jug could cause a weak water flow withing the dishwasher and me thinking it was the Re-circulation pump is incorrect?
Regards Deet
