Forum Replies Created
-
AuthorPosts
-
DJ-ApPlIaNcEs
ParticipantRe: Smeg DWF 410ss Dispenser solenoid
Thank’s Again… 😀
DJ-ApPlIaNcEs
ParticipantRe: Hart attack smeg
after 9pm 😀 Yes feel free
DJ-ApPlIaNcEs
ParticipantRe: SMEG DWF614SS
Thanks guys, yes when i removed the side and did a rinse water poured out, think the owner never used salt to keep the limescale down, it was like this all over the filter too. 😀
March 4, 2007 at 1:39 am in reply to: Whirlpool DWF 416 – flooded base – problem not the pump hose #206012DJ-ApPlIaNcEs
ParticipantRe: Whirlpool DWF 416 – flooded base – problem not the pump
Yes but did you learn why it poped out in the first place??? 😀
DJ-ApPlIaNcEs
ParticipantRe: reset code for DWF614SS
Tried the reset code several times with no luck, took a program board from a known working smeg and tried again with the same program but it did just the same as when it had the old program board in, So, it must be someting else…it throws no error messages up and the dispenser draw was replaced a year ago, Wonder if its the dispenser draw again. Just when i thought i had the better of the smeg 👿 So. please help 😕
DJ-ApPlIaNcEs
ParticipantRe: reset code for DWF614SS
Thank’s everyone, Had to park the smeg up for a week due to a heavy week comming up! but will let you know the outcome of the reset, removed the chip and replaced ready for when I can start back on the repair. Thank’s All 😀
DJ-ApPlIaNcEs
ParticipantRe: reset code for DWF614SS
😀 Thanks Penguin 😀 I will try that tomorow, It has had a new soap dispenser fitted so could be worth trying your reset sugestion, at the moment iv’e removed the programer board to look for dry joints and noticed a slight green colour like damp has eaten into three of the eprom chip legs, If i remove this chip to clean it will it loose all its data?
photo of board with chip if you zoom in you can see the corosion to the chip legs (just) 😀
http://img.photobucket.com/albums/0803/ … IC0256.jpgDJ-ApPlIaNcEs
ParticipantRe: reset code for DWF614SS
Hi ive tried doing a search for the reset code but calnt find it, Im wondering if there is a reset procedure for this dishwasher, At this very moment its working away but never getting to the end of the cycle, counts down to 1 min to go then bumps another 32 mins on top drains fills then starts a cycle again, this can happen time after time untill it finaly finishes. thats the reason i think a total reset will put the machine back to normal. So please, please HELP :tup:
DJ-ApPlIaNcEs
ParticipantRe: SMEG DISHWASHER DWF614SS
Thanks anyway for looking. :silent:
DJ-ApPlIaNcEs
ParticipantRe: Dishwasher smell
We have the same smell on a dishwasher around 7 years old and we put 2 caps full of miltons sterilzing fluid into the sump last thing at night if the smell is there… This lasts for some time before it needs doing again. 😀
DJ-ApPlIaNcEs
ParticipantRe: Triton T80 Shower
Try here… http://www.showerdoc.co.uk/ I have used them and they do have spares for most tritons 😀
DJ-ApPlIaNcEs
ParticipantRe: SMEG DF612SE DISHWASHER
eastlmark…Thank’s for your help. 🙂
-
AuthorPosts
