Forum Replies Created
-
Posts
-
Re: Setting maximum power on Hotpoint (Indesit) induction ho
Hi bepcooker
I have removed your advertising link. If you wish to advertise on the site please apply to admin for the current rates.If you need a reply to your question then the poster can simply post a reply here or mail you to the address you gave when you asked to join the site.
DonRe: Need a 13A electric oven with the shallowest depth possi
Hi
What’s the make and model number of the old oven?
DonRe: Fridge/Freezer APM 8652
All the info is in my previous post.
However if you measure the height of the appliance fridge and freezer door I should be able to help a little further.
DonRe: New Cooker Advice
Hi Jem
I do not know of any freestanding cooker which has a fan in the top oven. They are all static heating with the grill element.
In the absence of a budget I would look at the Cannon by Hotpoint range, not cheap but the shelving units and supports are the best I have come across.
Zanussi are also well worth a look as are Hotpoint.
Have moved thread to retail corner 😉
DonRe: Fridge/Freezer APM 8652
Hi Doogie
All integrated fridge freezers are the same block size it’s the door splits which vary, they are 80:20, 70:30, 60:40 and 50:50 fridge to freezer split.There are two hinging types fixed hinge and sliders. Sliders are the most popular, if you open your fridge door and look between then two doors you will see plastic bars and runners on which the doors move.
Once you have this info you are ready to search out a suitable replacement.
Have moved your inquiry to buying advice.
HTH
DonRe: Hoover AC272 door gasket.
Hi Steve
You could be in luck if it’s this one on Ebay. A good price as well.
DonRe: Purchasing advice required please
Hi
Yes it is a good choice in the condenser type of machine. Machine will perform just as well with full or partial loads. The timed mode is usually only a 20 minute warm cycle which is usually used as a freshen up cycle.
You do need an ambient temperature of approx 15 degrees C for the sensors to operate otherwise the dryer will not work.
Personally for reliability I would go for a vented dryer with a mechanical timer like the White Knight range. Very little on the inside to go wrong and at a fraction of the cost.
HTH 🙂
DonRe:
User name David I presume.
He’s just posted a “What happened to my post?” I’ll let you answer that one Jim
Don
Re: Removing top lid – waq283s1gb
Hi
Enter your full ENR number into the search on the Bosch site http://www.bosch-home.co.uk/store/spareparts/search The lid is easily removed by removing the screws and pushing the lid back from the front.
You could then fit the built under lid part no. 00689956 for extra safety.
DonRe: Beko fridge freezer CDA543FW-2
Hi
Moved your question down to Trade Tech enquiries just in case you wonder where it had gone 😉
DonRe: Zanussi Gas Cooker
gazcallyt wrote: any pointers before I take a peak.
Gaz
Don’t take a peak! Leave it alone and call a Gas Safe engineer to have a look.
That aside we are unable to advise on DIY gas repairs Forum rules apply.It’s better to be safe than sorry in the long run.
DonRe: New vacuum cleaner to replace 16year old Sebo C3.1
Hi
Sebo cleaners are the best you can currently get. Often used in large commercial areas like hospitals etc.
The D4 ECO is best in it’s class IMO and with the best energy efficiency it stands head and shoulders above it’s nearest rival which is probably Miele.
John Lewis partnership carry it http://www.johnlewis.com/sebo-d4-premiu … r/p1695925 Stock on display may vary from store to store, probably worth phoning your nearest one before you travel.
Don
