Forum Replies Created
-
Posts
-
Re: AEG Condenser Dryers
don wrote:
690-692 … MADE IN CHINA
00 – 09 … USA & CANADA
30 – 37 FRANCE
40 – 44 GERMANY
471 …. Taiwan
49 … JAPAN
50 … UKDon
Hi GarnThese are for all manufacturers 😉
DonRe: AEG Condenser Dryers
Hi Garn
R600A aka Bryan posted this barcode info a while ago which may help.
Just for your information to see where an item has originated by the bar code :
690-692 … MADE IN CHINA
00 – 09 … USA & CANADA
30 – 37 FRANCE
40 – 44 GERMANY
471 …. Taiwan
49 … JAPAN
50 … UK
DonRe: Oven cleaning kits
Just be careful where you put the bag :rolls: The last time we used this the bag had a very very tiny hole in it and it, yep the fluid leaked out which stripped the colour out of our nice blockwood worktop :eeek:
Like John it’s the best we have found.Available from most leading supermarkets around a fiver.
DonRe: Wiring connections for a Cannon Chichester 10578G
Hi
Forum rules 7 and 8 apply 😉
Trade access is available for engineers who request it subject to authorisation by admin.
DonRe: Wiring connections for a Cannon Chichester 10578G
Hi Andy
Welcome to the forums 🙂Sadly we can’t advise on DIY gas repairs forum rules I’m afraid.
If you are trade you will need to apply for trade access link here in order to get the help you are looking for.
DonRe: GHD Hair straighter spares
Hi
An old thread here which will get you started.
More info available if you type GHD into the search function 😉
DonRe: Baumatic door handle kit for bwd12-1 can’t be £40 can it
Hi
I can’t find a pattern kit I’m afraid. The genuine part no. is BMT07025465. Dave in the shop may be able to help, drop him an email to spares@ukwhitegoods.co.uk
DonRe: Best Compromise hob
Hi
Yes that is about right, they do require good ventilation in order to keep the fans running. Issues arise if these installation instructions are not adhered to and if the hob fails the manufacturers will decline to repair.
Attached is the Bosch induction drawing which is pretty much typical of most manufacturers. Also bear in mind induction hobs have a heavier connected load so make sure you have an an ample power outlet.
Don
Re: Two freestanding induction cookers
The Zanussi will be the scaled down version of the AEG made exclusively for JLP hence the difference in the spec and the lower price ticket.
I suspect the grill pan is the full width variety like the Bosch and Neff which if full with cooking you would be able to hold it with a single handle. There are now two hand handles available for these.
The pan will have one edge beveled for easy handling when held with gloves etc.
Probably a good idea to visit your nearest JLP to see the differences.
DonRe: Two freestanding induction cookers
Hi
Zanussi and AEG are both part of the same company. JLP have a lot of product produced by this group for them.
You can compare them both on the John Lewis website. Some of the JLP model detail is missing but reading across the spec I would wager it would be similar spec. There must be something slightly different as the total connected load on the Zanussi is 700w less.
Cosmetically different and a £100 cheaper if you go for the Zanussi version.
For some unknown reason the comparing url will not link across to this post so I have attached a screenshot of the most important detail.
HTH 🙂
DonRe: Football Season 2014/2015
I wish BBC1 had gone to the “Lane” instead of Ipswich. I was nodding off in parts and I’m a Saints fan :rolls:
DonRe: Hotpoint BF31 Dishwasher Lower spray arm
grooster wrote:No, the original one is the metal one. It is an old machine.
Thanks anyway. Think i’ve managed to source one now
Which part number did you find? It may just save someone else in the future with the same problem.
DonRe: Integrated condenser tumble Dryer
I was working on the basis that it was better than nothing 😉
If condenser is really needed then you will need to forsake the built in look and fit a freestanding machine.
HTH 🙂
Don
