Forum Replies Created
-
Posts
-
Re: Word Count
Back on the road again :clown:
Isdal,JTM and KnowHow all fine.
NESN
Para 6
At about the same time Currys was running a trial with NESN with NESN
Repaircare okay too.
Don
Re: Word Count
BG fine 🙂
Comet Service
1st para Comet has ran it’s own
3 para
result has been one of the first casualties after opCapitaGo Local reactive okay as well.
Indesit fine as well.
Will have a go at some of the others in a while.Don
Re: Word Count
0800 first paragraph
The business is actually owned by an entity known as The Pacifica Group whcih
Third paragraph
THey also use black and yellow vans with huge model screwdrivers mounted on the roof as shown in order to stand out.
Appliance repair franchises
Whilst this caused much conversation when launched within the industry it seems to have fallen from grace somewhat with 0800 increasingly employing engineers where they have the call volume sor density to support a direct employee or, they subcontract the work to a local repairer.
Will take a peek at BG.
Don
Re: Electrolux glider belt problem
Sorry should have read brush roll. Was thinking about motor spindle at the time.
Don
Re: Electrolux glider belt problem
Looking at the explosion there is no belt cover on the motor spindle, but there is a belt guide cover over the brush roll.
Assuming you have fitted the correct motor and belt the only other thing I can think of is the chassis may be twisted which causing the belt to run off.
HTH
Don
Re: Electrolux glider belt problem
Hi foxhole
Welcome to the forums 😀
Can you post up the all important model number please usually starting Z….
Don
Re: Word Count
I found it, good old USA spellcheck 😆
Under sub heading commercial use at home third paragraph ” Our advice here that we can’t stress enough to you is, make sure that you explain your needs to the retailer before you buy so that they can advice accordingly.
Otherwise an excellent read 😀Don
Sent from my superfast Google Chrome browser :clown:Re: Zanussi ZBP1165X Oven
Hi Dave
Need the PNC starting 949 to identify the correct model number.
Don
Re: Zanussi ZWG1140M no spin.
iadom wrote:
I don’t know how to get into diagnostics on these ( if anyone who has access to Pro Corner could help me out I would be most grateful ).
Jim.
You only had to ask :clown:
Rather large file winging it’s way to you at zen.co.ukDon
