Forum Replies Created
-
Posts
-
Re: Approved Electrical Connections
Steady martin, with doing that repair on your lawnmower you have probably made an illegal connection and broke several by laws and regulations, how unsafe and i hope someone reports you to the relevant authorities.
Lucky you have a fused plug which in turn is connected to your fused consumer unit!
Sent from my iPhone
http://www.kitchenkitsw.comRe: Kettle has died, what make should I get now?
We use a franke minerva everyday, makes great tea etc, it is boiling!
Fact is that you only buy one for convenience, not if you want to save money
Sent from my iPhone
http://www.kitchenkitsw.comRe: Kettle has died, what make should I get now?
Franke minerva, hot water and filtered cold through one tap.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Approved Electrical Connections
Exactly what martin said, you are looking to blame someone or confirm that whoever did the poor connection has broken the law, they havnt! Move on
Sent from my iPhone
http://www.kitchenkitsw.comRe: BUSH WM-1260B AUTOMATIC WASHER
So in others words it was a crap machine when you bought it and its still a crap machine, you are just lucky its lasted this long and that is mainly because you don’t use it!
At least you are keeping the Chinese people who work in that factory for ten bob a week in a job, and giving the eco people something to talk about with all those excessive fumes they pump in to the air from the factory, and thats before we get on to transportation costs and enviromental damage it causes, but as long as you are happy thats all thst matters
Sent from my iPhone
http://www.kitchenkitsw.comRe: Replacing neff hinge runners/bearings
If that is the way you feel then you should really get someone in capable of doing the job, i am of the same opinion as martin, you have been given more than enough information to do the job and you obviously are not up to doing the job, so stop now before you wreck you oven completely.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Replacing neff hinge runners/bearings
Just screws, it is that simple a job.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Replacing neff hinge runners/bearings
Yes i agree with martin, i find screwdrivers are very good
Sent from my iPhone
http://www.kitchenkitsw.comRe: Washing Machine Y-Adaptor Troubles
Or make up copper pipe with washing machine taps on with a 3/4 thread end, then you could connect this manifold to the original tap and hey presto you have individual taps to isolate individual machines
Sent from my iPhone
http://www.kitchenkitsw.comRe: Approved Electrical Connections
I haven’t missed the point, i do about a dozen replacement appliances a week where at least 3 of them will be bodged in wiring wise, all we do is install and connect safely and thats it job done, there is no one who we can report the original installer too who bodged it, and to be honest we wouldnt waste our time.
I really dont get what point you are trying to make, i really dont.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Approved Electrical Connections
Fit an approved junction box, then every one is happy, manufacturers will have no issue with plugs missing as long as the appliance can be issolated, built in appliances are nearly always hard wired.
I cant help bur think you are over complicating this and there is no just cause, so what if the last guy made a mess of it, as long as you do it properly you will have a customer for life.
Sent from my iPhone
http://www.kitchenkitsw.comRe: Rangemaster Toledo 110
You dont need to touch the gas side, its probably the wires have come off the plate, its a known fault and rangemaster normally do it free.
Sent from my iPhone
http://www.kitchenkitsw.comRe: PAT Testing
Martin you say PAT is pointless? Surely anything that adds to the customers safety is not pointless, bit like testing earth loop in a house, not a legal requirement either
Sent from my iPhone
http://www.kitchenkitsw.comRe: PAYE In Real Time
Great isnt it, my accountant has already advised me of an additional cost due to it!
Sent from my iPhone
http://www.kitchenkitsw.comRe: Diplomat electric oven stopped working
Hi, you seem to be ignoring my posts, this will be my last bit of help for you, dont order a thermal cutout as this will not fix your oven and hob, please get an engineer out to correctly diagnose the fault with your oven and hob.
Sent from my iPhone
http://www.kitchenkitsw.com
