elwasher

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: lg direct drive squealing when trying to spin #449184
    elwasher
    Participant

    Re: lg direct drive squealing when trying to spin

    Think you may be right although I did change the magnet rota to one with a metal spline not the plastic one on the original but still did the same thing, although I did notice when refitting the spindle moved into the tub and had to pull it back out?

    in reply to: lg direct drive squealing when trying to spin #449180
    elwasher
    Participant

    Re: lg direct drive squealing when trying to spin

    It’s definitely not the pump. When on the spin cycle the drum tries to turn but then make this horrible noise I know you shouldn’t do this but if you turn the drive plate it will suddenly spin ok it just can’t start the spin without help. That’s why I change the coil unit and hall sensor first off the other machine which worked ok as I thought it was the hall sensor with the error code LE

    in reply to: Beko washer problems #437573
    elwasher
    Participant

    Re: Beko washer problems

    Hi sorry for just getting back here are the model numbers all with the same problem
    WMB71642W
    WM74135W
    WMP652W
    WM7355S

    in reply to: Beko washer problems #437572
    elwasher
    Participant

    Re: Beko washer problems

    Hi Dave, I’ll get them today and get back to you, thanks

    in reply to: Bosch Oven lamp blowing #432800
    elwasher
    Participant

    Re: Bosch Oven lamp blowing

    Hi sorry and thankyou I’m new to the site and still learning so apologies for the lack of information.
    The Enr no is hba13b250b and I have just found the lamp assembly on Qualtex so I think on your advice I’ll try that first.
    Thanks

Viewing 5 posts - 1 through 5 (of 5 total)