Forum Replies Created
-
Posts
-
hi guys. why is it so hard to get a grill/oven element for a beko cooker? they dont want to supply the part only to there service agent. my local appliance repair shop tried to get me a element for a beko dvc6531 and could not get it. they would not supply it to him. has any one else had problems with getting beko spares? fasetester 😕
Re: service force
thanks alex for your reply so gerry mc vivern has retired so the belfast operation has closed up. i was down a couple of times for an interveiw for a job. is it the same force as was in belfast operating out of mayobridge or have they down sized? they used to be service force and then they took on a few more brands and was euro force as well so the boss man is now seamus lively 🙂 fasetester.
Re: removing bearing on dryer motor
thanks martin do you need a puller or can it be taped of the splines 🙂 fasetester
Re: Seat Inca van
thanks burns for your reply i was going to look at one 1999 50,000 miles ply lined roof rack only used for light use exellent conduction 19sdi but it was sold £1400 🙁 fasetester.
Re: zanussi drum making a noise
she thought there was some thing jammed in the drum as it was jammed tight only when i released it and i told her it was the bearings she said when it was spinning you would think it was a plane taking off win some loose some thats the way this game is 🙂 fasetester
Re: zanussi drum making a noise
thank again for your help martin and wilf i went to see the machine and it was jammed tight but when i got it to move the drum had a lot of play and the lady said when it spun you would think it was full of gravel ball bearings rattling she said she would go for a new machine 🙂 fasetester
Re: zanussi drum making a noise
sorry martin for getting you rattled so is things that bad mystic meg is doing appliance repair now by the way the number i got was 1245w thanks 😉 fasetester
Re: zanussi drum making a noise
does the drum have to be split on all these zanussies there no other way of getting what ever is stuck in the drum out so i have to split the tub realse the shocks take out the soap drawer remove all the wireing remove the motor relase the door seal from the outer casing is there any thing else i would need to remove and when you say + parts what parts would i need to replace sorry all the questions fasetester thanks for your help martin
Re: zanussi drum making a noise
the case has to be split and then the tub removed from the case and split to get at the inner drum what kind of money would you charge fot that job if you dont mind me asking you thanks fasetester 😳 thanks
Re: zanussi drum making a noise
thanks martin so the only way is a complete strip down a fair big job what woud you say 2 to 3 hrs could run into a fair amount which some people are not willing to pay no handy way to check to try and remove the problum the casing has to be split and then the tub removed and split and then you dont know if the tub is damaged from all the scoring as you say the fluff like stuff is coming from the tub 😕 fasetester
Re: neff dishwasher
thanks again greg so is there a pannel you can remove at the frount to get at the heater and if the heater is open circuit and i have to replace it how tight should i tighten the nut on the flange so i dont distort the seal so was this a common fault on the neff for breaking wires in the loom would you say it would be ok to put a connector on the wire if it were broken or replace the whole wire if so what gauge should be used would you have any idea what price a element would be for the neff sorry for the long questions and is there any thing that you can put on to protect the wireing loom where the door bends thanks again for your help 🙂 fasetester.
