fasetester

Forum Replies Created

Viewing 15 posts - 31 through 45 (of 540 total)
1 2 3 4 … 34 35 36
  • Author
    Posts
  • November 16, 2020 at 6:07 pm in reply to: Aeg electroux 14840 #473236
    fasetester
    Participant

    Could this be a pcb fault thanks fasetester

    November 16, 2020 at 6:05 pm in reply to: Aeg electroux 14840 #473235
    fasetester
    Participant

    Works for about 30min then stops press start and work again

    November 16, 2020 at 12:20 pm in reply to: Aeg electroux 14840 #473234
    fasetester
    Participant

    Prod no 914605004 00 AEG Lavamatic turbo model L14840

    November 15, 2020 at 8:12 pm in reply to: Aeg electroux 14840 #473231
    fasetester
    Participant

    Or a list of thing to check does it relate to a water problum thanks

    November 14, 2020 at 7:07 pm in reply to: Zanussi Zwg120k #473164
    fasetester
    Participant

    Thanks dave there two bruises on either sides of the machine so the drum must of being making contact and must have being shaking a far bit to have broken the catches on the front of the lid if not the weights damaged must be the shocks fasetester

    October 23, 2020 at 6:05 pm in reply to: Hotpoint washing machine WMBF742g #472710
    fasetester
    Participant

    Thanks Dave fasetester

    October 23, 2020 at 4:15 pm in reply to: Hotpoint washing machine WMBF742g #472708
    fasetester
    Participant

    Do you know what the fault is Dave is it the door switch thanks fasetester

    October 23, 2020 at 3:19 pm in reply to: Hotpoint washing machine WMBF742g #472707
    fasetester
    Participant

    So it wont matter if it’s a different owner or address so the person that bough it can still get it fixed

    October 23, 2020 at 3:01 pm in reply to: Hotpoint washing machine WMBF742g #472705
    fasetester
    Participant

    Thanks Dave for your reply the person bough the machine from the regional owner the bought new machine can the still register to get it fixed under recall

    October 23, 2020 at 2:56 pm in reply to: Hotpoint washing machine WMBF742g #472704
    fasetester
    Participant

    Thank Dave

    October 21, 2020 at 8:03 pm in reply to: Siemens 8kg iQ 100 #472662
    fasetester
    Participant

    Thanks for the reply don is there one model better and another the looking £100

    June 23, 2020 at 10:11 pm in reply to: Commercial floor machines #469857
    fasetester
    Participant

    Thanks guys for your replay was looking at them in supermarket the only chance you would have in repairing them if the were owened and not leased on contract the only other way would try get job working with company that repaires and services them .

    most companys that repaires floor scrubbers repair shampoo steamers powerwashers ect fasetester

    June 22, 2020 at 9:28 pm in reply to: Commercial floor machines #469854
    fasetester
    Participant

    No information on commercial floor cleaning machines has no engineer worked on them fasetester

    June 4, 2020 at 2:23 pm in reply to: Hotpoint wmf 740 #469205
    fasetester
    Participant

    Thanks murv and dave for your help put motor and interlock back on took of display board to check it found one of the traces with some corrosion give it a scrape put all back togeather and away it went

    so this information might help someone else out thanks again fasetester:)

    June 3, 2020 at 5:19 pm in reply to: Hotpoint wmf 740 #469203
    fasetester
    Participant

    Thanks murv so in your opinion thè triac is the most likely component to cause this problum if their is no visual damage to the pcb such as blowen tracks or burning fasetester

  • Author
    Posts
Viewing 15 posts - 31 through 45 (of 540 total)
1 2 3 4 … 34 35 36