Forum Replies Created
-
Posts
-
Re: what is a SINGLE chest freezer?
Maybe the double is something like this, maybe seperate compartments
Greg
Re: Diplomat ADP 8352
Poorly installed by “fitter”, will need the door springs re-tensioning (as per handbook) to compensate the weight of the door correctly.
Correct tensioning will result in the door remaining open when fully opened and when door is raised slightly it should spring gently up to an ajar position.Greg
NB – Door tensioning MUST be done with the wood door panel on 😉
Re: ariston LS1 61 tripping fuses
carbox wrote:When reconnected to power supply the machine power on light illuminates but I can not get any green lights on the programme buttons.
Once the earth leakage (which must be at an acceptable level now not to activate the RCD); has gone to an even lower level, then Im confident the programme selection will return.
If you open the door and press the on button, then turn it off, quickly start pressing the P button, does it start selecting then progs then fade out?
If sothats the usual sign for the earth leakage messing up the module and the first paragraph then is probable.Greg
Re: Bosch oven HBN 49.0
No idea, only showing an /01. No other model at all, just the one 😕
Maybe someone else has an idea on this :con:Greg
Re: QED ?
Penguin45 wrote:😯
Gegsy……………
Chris.
Get a room with a webcam 😯 😕 😕 😉
Greg
Martin……………. 😀
Re: Bosch oven HBN 49.0
How strange 😕 They only manufactured a HBN4950GB/01 😯
If that is the one, as Mr NP says hinges 😉 p/no 483651 per hinge, available from spares@ukwhitegoods.co.uk 😀 approx £8 + the usual each.Greg
Re: DELONGHI DFG905 knobs and LPG jets
Hi
Any alterations ie jets, should be done by a qualified gas installer.
Some appliances are NOT able to be converted from one gas to another.
Best leave it to the pro’s IMHO.Greg
Re: rangemaster 110
Hi
This is a genuine decent one.
The main fault with the Beko ones (range or cooker) is the clock dead/no main oven. Thats down to the thermal fuse of the cavity blowing as its under rated. 😉Greg
Re: rangemaster 110
If you stick model up (remove r/h warming drawer completely and look on the r/h chassis strut, should have 4 digit number 5???) will try and get p/no 🙂
Greg
Re: rangemaster 110
Hi
You could look for dry joint on pcb of clock and check continuity on button contacts, re- grease ingress 😀
Failing that new clock or link switching wires for oven from clock if customer ain’t bothered about clock display and timed cooking.Greg
