[gegsy]

Re: Ignis intergated dishwasher

Hi
Stuart, yea part of Whirlpool 😀

Greg

[gegsy]

Re: SMEG Dishwasher ST1

Hi
If its an STX1 nothing else after that number, you will need to replace the PCB itself, p/no 816290674. It is available from spares@ukwhitegoods.co.uk.
Power off if attempting any repair/investigations yourself :plug:

Greg

[gegsy]

Re: Whirlpool Wet Bottom

Hi
I would be checking that the drain hole at the bottom rear of the fridge interior wall isnt blocked 😉

Greg

[gegsy]

Re: Noisey Bosch Frost Free Fridge-freezer

Hi
Only has one fan in the appliance so I can only assume its the compressor without physically being there :con:

Greg

[gegsy]

Re: Schreiber APP6302 Door Seal replacement

Hi
If you peel the seal back so that you can see the plastic door inner behind, do you see screws evenly placed around its perimeter?
If so, seal is replaceable but you will have to detach the door inner from the main door with those screws. I would take the door off to do that job 🙂

Greg

[gegsy]

Re: How to swap out Zanussi DA6141 IWMS – vent grill removal

IIRC it should unscrew anti clockwise 😀

Greg

[gegsy]

Re: Smeg E2

Hi
With no model number I will have to guess 😉
If you remove the filters and look at the 12 o clock position for a black rubber flap covering a hole.
Remove the flap from its barbed attachment and then continue to clean as far as possible up that covered hole with something like a babies bottle brush and remove any gunge by hand that may appear.
Re assemble and test.

Greg

[gegsy]

Re: ariston LS1 61 tripping fuses

Hi
Unplug appliance and look in the base below the main wash tank for water which has probably swamped the re-circulation motor causing earth leakage which is tripping your breaker.

Greg

[gegsy]

Re: missing link

No problems with that here 😕
What you can get is an email prompt when a reply has been made on a topic you have posted. When you click the link you find that it says the post cannot be found. This is normal if poster changes his or her mind and deletes that post before you actually get to read it.

Hope that helps, explained badly sorry 8)

Greg

[gegsy]

Re: September 2007 Meeting

Oh ha ha :martin: :snig:
Hope you all having a good meet/drinking session 😉

Greg

[gegsy]

Re: September 2007 Meeting

Jims slumming it on 1Meg 😀
He appreciates how the other half live now 😆

Greg

[gegsy]

Re: What’s Reasonable I wonder ?

Hi
Too right charge her £25. This is approx how much it costs to get an engineer to the door without considering the diesel.
She won’t be out the 3rd time 😉

Greg

[gegsy]

Re: Fault – My dishwasher keeps tripping RCD

Penguin45 wrote:Double post deleted……….. :rotfl:

Server must have been dicky…oerr

Greg 😆

[gegsy]

Re: Bosch WFL2450UK/12 No heat

Excellent :tup:

Greg

[gegsy]

Re: diplomat dishwasher ADP8322

Hi
I would imagine you have a faulty NTC feeler.
This is the bullet shaped unit you can see if you remove the filters 😀
P/no at last check was 4812 282 68035, available from spares@ukwhitegoods.co.uk

Power off if you are to attempt any work yourself on the appliance 😉

Greg

[Author]

Posts