Forum Replies Created
-
Posts
-
Re: Bosch WFX148Sgb/20
Hi Tim
Basically its taking too long to fill and is timing out.
Usual suspects, low pressure, kinked hose,strainers blocked etc 😀HTH
Greg
Re: The Martin conumdrum.
Sorry for not posting much of late guys, been a tad busy 😀
I will catch up with site as soon as poss.
(Damn Ive bumped this thread 😈 )Greg
Re: Neff double oven U1150W0 GB/01 fan motor
Hi
I take it you mean the main oven circotherm fan motor?
If so the p/no is 084701 and is available from dons link 😉Greg
Re: Bosch Classix ENr SGS6962GB/13
Yup, water level is controlled by that pressure unit next to water matrix.
Im not sure if you have cleaned the ribbed rigid pipe from the pressure unit to the front of the sump. This pipe o rings in eiether end.Greg
Re: Samsung SR-S2028CSS
Hi
They are push fit and to remove old you will need to push collar inwards to release pipes from coupling.
When fitting new, longest pipe to the front of appliance, below removable trim. Care must be taken on the routing of the rear pipe to the water valve, as it may at somem satge com ein contact with the compressor cooling fan blades. Take your time and look for leaks before putting all back together.Power off first of course before attempting any of this :plug:
Greg
Re: adp8332 dw
Hi adv
You say these dishwashers.
You sound like you are in the trade? If you need to join the darkside please contact site admin. 😉Regards
Greg
Re: Bosch WFX3268GB/23
Module if I was to put money on it. Worth checking for earth leakage also (as if you don’t 😉 )
Greg
Re: Bosch Classix ENr SGS6962GB/13
This is a timed fill machine and the usual suspects for making the banging noises of fill then empty cycle is crud.
Check the ribbed transfer hose from the sump to the pressure unit next to water matrix. The hose will pull off both ends (make sure appliance drained fully and have a cloth) and fully clean inside it.
Also the pressure unit maybe crudded up which comes apart to gain access to clean.
Worse case is a blockage in the water matrix which is totally sealed and may need replacing if that is the case.Power off before attempting any of the above.
Greg
Re: Siemens Oven ER15
Hi
It thinks the oven cavity is above 300 deg so it stays locked.
You can delete the error, will send you some notes but without full enr (may be on the back) uts going to be a bit of a guess.Greg
Re: 08/09-Football Season
Hull City minor glitch 😉 early days re premiership 😆
Nice to see Spurs and Man U union 😕 😆Greg
