gegsy

Forum Replies Created

Viewing 15 posts - 181 through 195 (of 6,724 total)
  • Author
    Posts
  • in reply to: wff 2001 bosch #264182
    gegsy
    Participant

    Re: wff 2001 bosch

    Hi
    Two bolts, one with facing nut head, the other has the nut head hidden behind that have removed already.
    The motor should swing down, pull motor forward IIRC an it will detach off its mount.
    Power off first.

    HTH

    Greg

    in reply to: Bosch Brush fitting – which direction? #264194
    gegsy
    Participant

    Re: Bosch Brush fitting – which direction?

    Hi
    I usually do one at a time.
    Turn motor spindle by hand and if it sounds and feels like a jackhammer, remove brush and turn round.

    HTH
    Greg

    in reply to: Replacing a Seal on a Siemens Freezer #261783
    gegsy
    Participant

    Re: Replacing a Seal on a Siemens Freezer

    This one should just push in IIRC, nice 😉

    Greg

    in reply to: Problem with the Bosch SGS57C12GB #263489
    gegsy
    Participant

    Re: Problem with the Bosch SGS57C12GB

    As Jim said, remove that cover and what I do is then put machine on cancel or a drain programme.
    If any foreign object is present in the drain area, it will usually fire it out.
    Open the door after a 5 secs of drain and carefully locate the offending debris within the cavity.

    HTH

    Greg

    in reply to: Bosch Check Water Light Problem #263483
    gegsy
    Participant

    Re: Bosch Check Water Light Problem

    Not draning fault aside, the most common reason for the “check water” to illuminate is the flow meter or impellor jug as its called ,p/no 424099.
    They have a high failure rate :rolls:
    Part available from spares@ukwhitegoods.co.uk.
    Power off if you are to attempt any repair yourself :plug:

    Greg

    in reply to: Neff HBN9362GB/01 FD8306 #263534
    gegsy
    Participant

    Re: Neff HBN9362GB/01 FD8306

    Hi
    I would try the hinge receivers p/no 172647, same for both ovens; that will sort Im sure 😉 .

    Greg

    in reply to: Whitegoods September ’08 Meeting #251292
    gegsy
    Participant

    Re: Whitegoods September ’08 Meeting

    Have a good meet guys, apologies for not being able to make it.

    Greg

    in reply to: Bosch Logixx8 fault code F27 #262507
    gegsy
    Participant

    Re: Bosch Logixx8 fault code F27

    F27 Analogue pressure sensor error, check wiring to and from sensor and module.

    Power off if you are to have go :plug:

    Greg

    in reply to: 08/09-Football Season.. #254821
    gegsy
    Participant

    Re: Barclays Prem Lge 08-09/Champions Lge/Other football

    iadom wrote:………………. Walcott was brilliant and Rooney had a blinder

    Only Sven doubted Theo’s ability, I always new he was special stuff 😀

    Greg

    in reply to: Smeg SUK62MFX5 main oven keeps switching itself off #261796
    gegsy
    Participant

    Re: Smeg SUK62MFX5 main oven keeps switching itself off

    Hi
    It sounds to me like a cooling problem IMO, but because the appliance is part gas, we cannot advise any further sorry.

    Greg

    in reply to: Bosch sgs46e22g not filling #262223
    gegsy
    Participant

    Re: Bosch sgs46e22g not filling

    Hi
    Can you hear the water entering the machine after the initial draining has finished ?
    If not you will need to see if you have water coming out of hose feeding the appliance. If you have then contact Bosch for a service calll as you have a 2 year guarantee.

    Greg

    in reply to: bosch knob(wfb2405) #262280
    gegsy
    Participant

    Re: bosch knob(wfb2405)

    Hi
    Fascia will pop off after removing screws around dispenser IIRC.
    Once off, all will become apparent 😉

    Greg

    in reply to: Bosch sgs0902gb09 will not start #262160
    gegsy
    Participant

    Re: Bosch sgs0902gb09 will not start

    Hi
    There are test procedures but unfortunately we are unable to divulge due to copyright and legal issues, sorry.

    Greg

    in reply to: Siemens WTXL733CGB/07 #262154
    gegsy
    Participant

    Re: Siemens WTXL733CGB/07

    Maybe worth checking the door lock and its connections 😕

    Greg

    in reply to: Bosch KGN39V00GB/02 Ice in bottom of freezer compartment #262234
    gegsy
    Participant

    Re: Bosch KGN39V00GB/02 Ice in bottom of freezer compartment

    I would contact Bosch tbh, despite being one month out 😉

    Greg

Viewing 15 posts - 181 through 195 (of 6,724 total)