gegsy

Forum Replies Created

Viewing 15 posts - 196 through 210 (of 6,724 total)
  • Author
    Posts
  • in reply to: Bosch SGS 6312 Dishwasher dispenser has stopped opening #262239
    gegsy
    Participant

    Re: Bosch SGS 6312 Dishwasher dispenser has stopped opening

    Hi
    Most probable is the little wax actuator has died, tbh (p/no 166635)
    If that checks out ok, then module (p/no 264877)

    Power off if you are to investigate inside :plug:

    Both parts are available from spares@ukwhitegoods.co.uk

    Greg

    in reply to: Bosch Oven #261916
    gegsy
    Participant

    Re: Bosch Oven

    Think P45 already touched that one 😉

    Greg

    in reply to: Bosch Oven #261914
    gegsy
    Participant

    Re: Bosch Oven

    Hi
    Just oven out, lid off and remove locking clip off selector assy.
    Ease selector/stat assy off mount ,remove remains of broken one off shaft and slide new one on.
    Re assemble; not forgetting the locking clip and away you go 😉

    Greg

    in reply to: Bosch sgs0902gb09 will not start #262158
    gegsy
    Participant

    Re: Bosch sgs0902gb09 will not start

    Hi
    Quite an intensive machine is that one.
    Could be faulty lock unit (motor driven or servo) or faulty module.
    Power off if you are to investigate.

    Greg

    in reply to: Siemens WTXL733CGB/07 #262152
    gegsy
    Participant

    Re: Siemens WTXL733CGB/07

    Hi
    Sounds like its in TEST mode tbh.
    Have you been to it yet ? If not try switching it off and then back on, that will terminate the TEST prog.

    HTH

    Greg

    in reply to: Another joke. #137436
    gegsy
    Participant

    Re: Another joke.

    A Good Dentist

    A guy and a girl meet at a bar.
    They get along so well that they decide to go to the girl’s place.
    A few drinks later, the guy takes off his shirt and then washes his hands.
    He then takes off his trousers and washes his hands again.
    The girl has been watching him and says, “You must be a dentist.”
    The guy, surprised, says “Yes….how did you figure that out”
    “Easy,” she replied, “you keep washing your hands.”
    One thing led to another and they make love.
    After they have done, the girl says, “You must be a very good dentist.”
    The guy, now with a boosted ego says, “Sure, I’m a good dentist, How did you figure that out”
    …………”Didn’t feel a thing!” 😆

    in reply to: WTE6920gb/04 #261521
    gegsy
    Participant

    Re: WTE6920gb/04

    Info in the ether as I type 😉

    Greg

    in reply to: AUS Moderation #259871
    gegsy
    Participant

    Re: AUS Moderation

    ……….and Moderator title now 😉

    Greg

    in reply to: Bosch SGS0902GB/04 DW #261175
    gegsy
    Participant

    Re: Bosch SGS0902GB/04 DW

    Ive had customers complain of “burning” smell, when it was only the insualtion black coating at the rear getting hot with wash; coming into contact with mains cable?

    Greg

    gegsy
    Participant

    Re: Bosch KIS34A20IE/01 fridge/freezer – Fridge is freezing

    Hi
    E1 is a fridge sensor problem.
    You will need to get a BSH engineer to sort for you as its still under guarantee.
    CALL 0844 8928979
    For Ireland call 00 353 1450 2655


    Lines in the UK are open Monday to Friday 8am to 8pm, Saturday 8am to 4pm and Sunday 9am to 3pm.

    Greg

    in reply to: Bosch Exxcel 1400 Express – Smelly clothes! #261266
    gegsy
    Participant

    Re: Bosch Exxcel 1400 Express – Smelly clothes!

    A good place to start would be HERE

    HTH

    Greg

    in reply to: Bosch Exxcel Dishwasher s9g1b #260498
    gegsy
    Participant

    Re: Bosch Exxcel Dishwasher s9g1b

    Hi
    Possibly low water pressure or faulty flowmeter (If fitted).
    Would need full model number off appliance itself to aid you further.

    Greg

    in reply to: Bosch SGS0902GB/04 DW #261173
    gegsy
    Participant

    Re: Bosch SGS0902GB/04 DW

    Hi Jim
    Worth looking at the water point unit plug, on heater.
    Had a few where the ‘o’ rings failure had caused a dribble down to the plug and charred some terminals 😀

    Greg

    in reply to: Siemens Extraklasse not heating/random programme times #260572
    gegsy
    Participant

    Re: Siemens Extraklasse not heating/random programme times

    Hi
    Same heater for drying 😉

    Greg

    in reply to: Siemens Extraklasse not heating/random programme times #260570
    gegsy
    Participant

    Re: Siemens Extraklasse not heating/random programme times

    20 – 28 ohms

    Greg

Viewing 15 posts - 196 through 210 (of 6,724 total)