gegsy

Forum Replies Created

Viewing 15 posts - 211 through 225 (of 6,724 total)
  • Author
    Posts
  • in reply to: AUS Moderation #259868
    gegsy
    Participant

    Re: AUS Moderation

    Does Bruce need is title changing from Top Poster to Moderator ?
    I know you is busy šŸ˜‰

    Greg

    in reply to: Bosch SGS5312GB/12 not filling #260921
    gegsy
    Participant

    Re: Bosch SGS5312GB/12 not filling

    A red dot in the display means the module is goosed Im afraid.
    Module p/no 264877 available from spares@ukwhitegoods.co.uk

    HTH

    Greg

    in reply to: 08/09-Football Season.. #254810
    gegsy
    Participant

    Re: Barclays Premier League 2008 – 2009 / Champions League

    Can’t take anything away from Fulham and Wenger has a lot of questions to answer, very poor šŸ‘æ

    Greg

    in reply to: Bosch wft8030gb/02 Fill fault #260435
    gegsy
    Participant

    Re: Bosch wft8030gb/02 Fill fault

    It allows 255secs (4.25 mins) to fill, after that it will fault.
    That is more than enough time to fill TBH.

    Greg

    in reply to: neff cooker hood #260207
    gegsy
    Participant

    Re: neff cooker hood

    Hi
    It Should only show two things in display when borking.
    1/ An “F” indicates a saturated grease filter
    Reset F by pressing the O button continously until an reaction follows.
    Possible reactions:
    audible signal
    display expires or shows ā€œ0ā€

    2/ A ā€œCā€ is displayed and an audible signal is emitted.
    C indicates a saturated carbon filter, i.e. replace the carbon filter.
    C is displayed after 240 (+30) operating hours.
    Reset F by pressing the O button continously until an reaction follows.
    Possible reactions:
    audible signal
    display expires or shows ā€œ0ā€

    HTH

    Greg

    in reply to: Bosch WTL6003gb/17 #260255
    gegsy
    Participant

    Re: Bosch WTL6003gb/17

    No float, straight off timer is the feed for the pump.

    HTH

    Greg

    in reply to: bosch d/washer sgs55c02gb/01 #260319
    gegsy
    Participant

    Re: bosch d/washer sgs55c02gb/01

    On the money there, Chris šŸ˜‰

    in reply to: Bosch s710 overfilling. #260093
    gegsy
    Participant

    Re: Bosch s710 overfilling.

    Can you supply model number off appliance itself.

    Greg

    in reply to: Bosch SGS47E02GB/35 programmes stop after 2/3 minutes #260106
    gegsy
    Participant

    Re: Bosch SGS47E02GB/35 programmes stop after 2/3 minutes

    PCB faulty as Mr P stated, no other reason to go to zero.

    Greg

    in reply to: BOSCH SGS5342GB/17 #260050
    gegsy
    Participant

    Re: BOSCH SGS5342GB/17

    Check spray arm jets are clear and that you load plates after they have had a quick swish under the tap.
    If it doesnt drain properly then you may have dirty water left in appliance as it refills for rinses.

    Greg

    in reply to: Enough to make you vomit… #252837
    gegsy
    Participant

    Re: Enough to make you vomit…

    Doggy bag :shutup:

    in reply to: Bosch cooker tripping electrics #259953
    gegsy
    Participant

    Re: Bosch cooker tripping electrics

    Dansta had a same fault with an Electrolux oven.
    Turned out to be circotherm element šŸ˜€

    Greg

    in reply to: Computer nerd required #243177
    gegsy
    Participant

    Re: Computer nerd required

    Windows up to date and all drivers current?

    Greg

    in reply to: Computer nerd required #243175
    gegsy
    Participant

    Re: Computer nerd required

    yup prob Vista šŸ˜‰

    Greg

    in reply to: Computer nerd required #243173
    gegsy
    Participant

    Re: Computer nerd required

    ACER IMHO. 10/10 for quality and customer support.

    Greg

Viewing 15 posts - 211 through 225 (of 6,724 total)