[gegsy]

Re: Washing Machine Not Spinning

You are most welcome Martin 😉

Greg

[gegsy]

Re: Washing Machine Not Spinning

Hi
An email to spares@ukwhitegoods.co.uk with the full model number off the machine rating plate should suffice.
You may find it useful to purchase at the same time a “com stick” to clean the motor commutator 😀

Greg

[gegsy]

Re: Large Whirlpool American Dryer.

Can you do that to the stat aswell 😛 😆

[gegsy]

Re: Hotpoint FDW80P NTC

Where abouts is NTC, can’t see it?

Greg

[gegsy]

Re: Washing Machine Not Spinning

Hi
With the power off, remove motor and check the motor brushes lengths, they should be approx 1.5″ from new to give you an idea.
It may also be worth checking for dry joints on the speed control module/pcb and/or possible on board fuse may have blown IIRC
Please put that back panel on before re-testing for your own safety 😉

Greg

[gegsy]

Re: Large Whirlpool American Dryer.

iadom wrote:I looked all over and couldn’t see a 12 NC number, where did you find that one Greg.?

On the front of the manual I sent you 😀 8)

Greg

[gegsy]

Re: Neff oven door sealing problem

Hi
Yes you have quoted the correct hinges and you may need the hinge receivers due to age of appliance, please note that there is a part change and the correct number is 172647 for left or right.

Greg

[gegsy]

Re: Beko WMA765S won’t play

Hi
Are you sure its Main wash thats flashing?

Greg

[gegsy]

Re: Belling XOU60MF oven instruction manual

Hi
You may have to contact Belling directly for this information.

http://www.belling.co.uk/Contact-Us.aspx

Greg

[gegsy]

Re: Hotpoint RZA34P – Transported on its back, comp cuts out

Hi
Without the correct tools and knowledge Im sorry there is no way of confirming that, sorry.
If you need an engineer in your area than please use the link below.

Greg

[gegsy]

Re: Hotpoint RZA34P – Transported on its back, comp cuts out

Hi
Sounds like you have managed to block the system by transporting it incorrectly and/or you may have dislodged some connections off the compressor itself. Power off if you are to investigate.

Greg

[gegsy]

Re: Neff S4453N2GB01 Semi integrated dishwasher clicking

Hi Simon
You have mail 😀

Greg

[gegsy]

Re: bosch classixx 1000 spin query

Hi
Shock absorber pack is p/no 448032 available form spares@ukwhitegoods.co.uk
A word of warning, the old shocks will require you to drill through the plastic bolt at the top of each to enable removal. The new ones come with bolts to attach them.

Unplug appliance if you are to attempt any of the above yourself :plug:

Greg

[gegsy]

Re: bosch classixx 1000 spin query

Hi
I suspect that the suspension legs will be in need of exchange.
If you can pop the full model number up off the door or rear of appliance then we can get you the part numbers you need.
That is the most common problem, you could also have a more serious problem. When you open the door, try and see if the drum has play up and down, it should be firm.

Greg

[gegsy]

Re: bosch wte 6920

Hi Dave
You have mail, it may help to diagnose for you 😉

Greg

[Author]

Posts