Forum Replies Created
-
Posts
-
Re: Miele Novotronic W980 WPS Washing Machine
Hi
I hope interlock cures it but with info given that was my best shot, wish you was around earlier seamy 😉
We can only advise the best we can without seeing appliance 🙂Greg
Re: Miele Novotronic W980 WPS Washing Machine
Hi
I would replace the door interlock IMO.
Email spares@ukwhitegoods.co.uk for the part 😉Greg
Re: Bosch SMS6032 overflows from matrix
Hi
If you remove L/H panel and locate the “S” shaped 1″ diameter hose that goes to the sump. Then proceed to remove it and give it a good rodding and cleaning.
There will be some water so be prepared and remember to unplug appliance prior.
You will find it easier with applaince on its back after removing panel 😉Greg
Re: BOSCH SPARES
Martin wrote:What do these hinges fit anyway? 😕
Well, you did ask 😆
G4342X0/01
G4342X0GB/01
GULDDE1FF/01 De Dietrich GG 4134 E51
GULDDE1FF/03 De Dietrich GG4134E51
GULDDE1GB/01 De Dietrich GG 4134 U5
GULDDE1GB/03 De Dietrich GG 4134 U5
GULDDE2FF/01 De Dietrich, GG 4134 E70
GULDDE2FF/02 De Dietrich, GG 4134 E71
GULDDE2GB/01 De Dietrich, GG 4134 U5
GULGGE1/01 IG110-112
GULGGE1/02 IG110-112
GULGGE1/03 IG110-112
GULKBD3/01 Kueppersbusch IGU 128-4
GULKBD3/03 Kueppersbusch IGU 128-4
GULMIE1/01 F110UI-6
GULMIE1/02 F110UI-6
GULMIE1/03 F110UI-6
GULMIE1/81 F110UI-6/81
K4312X0/01
K4312X0GB/01
K4313X0/01
K4313X0/02
K4313X0GB/01
K4314X0GB/01
K4314X0GB/02
K4315X0/42
K4315X0GB/42
K4332X0/01
K4332X0GB/01
K4333X0/01
K4333X0/02
K4333X0GB/01
K4334X0GB/01
K4334X0GB/02
K4335X0/42
K4335X0GB/42
KU14L01/01
KU14L01CH/01
KU14L01GB/01
KU14L02/01
KU14L02/02
KU14L02CH/01
KU14L02CH/02
KU14L02GB/01
KU14L03GB/01
KU14L03GB/02
KU14L05/42
KU14L05CH/42
KU15R01/01
KU15R01GB/01
KU15R02/01
KU15R02/02
KU15R02GB/01
KU15R03GB/01
KU15R03GB/02
KU15R05/42
KU1FNH1/01 KU1575D101
KU1VWH1/01 KI20
KU1VWH1/02 KI20
KU3FNF1/01 KU1435D101
KU3SFF1/01 Seppelfricke UKSI 143.20
KU3SFF1/02 Seppelfricke UKSI 143.20
KU3VWF1/01 KI21
KU3VWF1/02 KI21
KU5SFH1/01 Seppelfricke UKSI 150.20
KU5SFH1/02 Seppelfricke UKSI 150.20
KUL1402/01
KUL1402CH/01
KUL1402GB/01
KUL1403/01
KUL1403/02
KUL1403CH/01
KUL1403CH/02
KUL1403GB/01
KUL1403GB/02
KUL1404GB/02
KUL1405GB/42
KULAIF1FF/01
KULAIF1FF/02 RE28A
KULDDF1FF/01 De Dietrich RG 4143 E51
KULDDF1GB/01 De Dietrich RG 4143 U5
KULDDF2FF/01 De Dietrich RG 4143 E61
KULDDF2FF/02 De Dietrich RG 4143 E61
KULDDF2GB/01 De Dietrich RG 4143 U6
KULDDF2GB/02 De Dietrich RG 4143 U6
KULDDF3FF/01 De Dietrich, RG 4137 E70
KULGGD1/01 IK130-114
KULGGD1/02 IK130-114
KULKBF1/01 IKU138-4
KULKBF1/02 IKU138-4
KULMIF1/01 K115UI-6
KULMIF1/02 K115UI-6
G4343X0/01
G4343X0/02
G4343X0/03
G4343X0/04
G4343X0GB/01
G4343X0GB/02
G4343X0GB/03
G4343X0GB/04
GU12B01/01
GU12B01GB/01
GU12B02/01
GU12B02/02
GU12B02/03
GU12B02/04
GU12B02GB/01
GU12B02GB/02
GU12B02GB/03
GU12B02GB/04
GU1FNE1/01 GU1245D101
GU1FNE1/02 GU1245D101,
GU1SFE1/01 Seppelfricke UGSI 114.20
GU1SFE1/02 Seppelfricke UGSI 114.20
GU1SFE1/03 Seppelfricke UGSI 114.20,
GU1TIE1GB/01
GU1VWE1/01 GI20
GU1VWE1/02 GI20
GU1VWE1/03 GI20
GUL1202/01
GUL1202GB/01
GUL1203/01
GUL1203/02
GUL1203/03
GUL1203GB/01
GUL1203GB/02
GUL1203GB/03
GUL1203GB/04
KUR1502/01
KUR1502GB/01
KUR1503/01
KUR1503/02
KUR1503GB/01
KUR1503GB/02
KUR1504GB/01
KUR1504GB/02
KUR1505/42
KUR1505GB/42
KURDDH1FF/01 De Dietrich RG 4150 E51
KURDDH1GB/01 De Dietrich RG 4150 U5
KURDDH2FF/01 De Dietrich RG 4150 E61
KURDDH2FF/02 De Dietrich RG 4150 E61
KURDDH2GB/01 De Dietrich RG 4150 U6
KURDDH2GB/02 De Dietrich RG 4150 U6
KURDDH3FF/01 De Dietrich, RG 4150 E70
KURDDH3GB/01 De Dietrich, RG 4150 U70
KURGGH1/01 IK110-115
KURGGH1/02 IK110-115
KURKBH1/01 IKU148-4
KURKBH1/02 IKU148-4
KURMIH1/01 K116UI-6
KURMIH1/02 K116UI-6
KURMIH2/41 K116UI-6/10
KULMIF2/41Greg
PS – Bryan, give Julie a bell in the morning 😉
Re: Bosch SGS43C12GB/08 dishwasher overfills.
The wheel bearing appears to wear and then chaff thus giving duff signals back to module making it think it has turned less (not enough water entered) so fills longer till it sees the correct amount of pulses (or not) but by then its too late, overfilling has occured 😀
Greg
Re: Bosch SGS43C12GB/08 dishwasher overfills.
Yep, little buggers they are for failure 😥
P/no 424099Greg
Re: Bosch/Neff Not Emptying
jonesp1 wrote:was i correct in thinking as it emptied out correctly and i heard it go down the waste pipe the non return value must be positioned correctly.
It certainly looks like it 😀
jonesp1 wrote:does it matter which it is facing?
Yes, see above 😉
Greg
Re: Bosch Fridge Freezer fault E-nr KGN34X60GB/01
Public forum guys, PM’s may be more suitable 😉
Greg
Re: Bosch/Neff Not Emptying
Personally I don’t use them as I find no need to, so I have no comment really to make on that subject.
Im sure soem of the other guys or gals have pros and cons using them 😀Greg
Re: Bosch/Neff Not Emptying
Hi
The best thing you can do to keep appliance happy is to make sure that the worst of the food is scraped off in bin and that the plates/pans are given a quick rinse under the tap prior to loading.This link may help also
http://www.ukwhitegoods.co.uk/modules.p … ge&pid=203 😀The non return valve needs to be in the postion that allows the flap to open away from the drain pump to allow waste water to be able to evacuate when pump activated.
Greg
Re: Bosch/Neff Not Emptying
Hi
If you removed the cover over the impeller (under filters held by 1 x Torx 20 screw), is there a chance you didn’t replace it?Greg
Re: TEBA COOKER WIRING DIAGRAM
Hi
Mr Wright is more than welcome to sign up on here for a trade log in, providing he meets the criteria for the said account 😉Greg
