Forum Replies Created
-
Posts
-
Re: QED ?
http://www.ukwhitegoods.co.uk/modules.p … 810#136810
TMI by suedehead in public forum?
Greg
Re: Bosch WFO2864
Hi
Have had one of these abort a few mins into wash when I had a dribble of water from leak coming into contact with NTC plug causing bizzare readings from NTC to module.
It may be as Malt says, whereby weird resistence readings from motor are not what module expects and therefore aborts 😕
Earth leakage may also send it to oblivion 😕Greg
Re: QED ?
Bloody hell Ken, how many more of your siblings are there 😆
We now have a halfwatt registerd now :rotfl:Greg
Re: It was Forty Years ago Today
roly16 wrote:That’s a pretty picture. Who are the four men in the middle dressed in the funny clothes?
Ere Roly you’ve given me an idea and something that may be a bit of fun/challenge.
From left to right can anyone name the people shown ❓ 😀Greg
PS – I do have answers 😉 Have enlarged pic to aid.
Re: Bosch Classixx got me stumped
Hi
Try opening the door and looking on the top of the stainless inner, its usually etched there, odd lighting angle required 😀Greg
Re: Diplomat ADP8332 – F4 Fault
ron1050 wrote:Can I ask what do you mean by emptying? – how can I tell if it has water to drain in the first place?
Hi
Normal fill level is just below lower spray arm, half way up its mount.
After the re-set, the appliance pumps out for app 1 min. When the pumping sound ceases, open door and there should be no water above filters in the base only a small amout in sump if you remove filters.Greg
Re: miele
Hi
I know the WS5425 used to get loom damage in the bottom right. May be worth a look 😀 The loom may read ok with panel in a different position when testing. 😕
GregRe: Bosch Classixx got me stumped
nobbyone wrote: Any thoughts or pointers would be appreciated.
Yea a model number :whip:
Greg
Re: Bosch WFT 2800
Hi
No4 combined with the conditioning lamp being on, is a heating fault so armed with a multimeter I would go and see if heater has gone.
You would be looking at around 25 ohms for a working element.
Power off if you are to investigate.Greg
Re: Bosch WTE84107GB/01 FD 8507 Tumble Dryer
nomadPaul wrote:just a small point….but with an FD of 8507 , isn’t it still under the Bosch warranty ?
😯 Till end of July this year at worst, nice one Paul 😉
Greg
