Forum Replies Created
-
Posts
-
Re: No nice way to put it…
Interesting stuff K, but if Herr Trubshaw can manage it who knows 😕
Greg
Re: It was Forty Years ago Today
Wasn’t even born then Jim 😉 but have all Beatle albums on mp3 good stuff 😀
Re: Word Count
No probs with that.
Thats pic of Ian’s, its not a Sovereign piece of crap is it 😥
The was a comma missing but mot gonna mention that 😀Greg
Re: Diplomat door stuck
Hi
If its a smeg built one then a commonish fault is the pin holding the door peg; sliding out of its mount and causing the door catch to become compromised.Greg
Re: Indesit WIDE127 Error code
Three quarters down page to save you the effort looking for it http://tinyurl.com/35ax3d
our very own over worked Mr Conways offering 8)Greg
Re: Fault code F04 Whirlpool ADP4732al
Most welcome and thanks for taking the time to update the post 😀
Greg
Re: Is it Safe
Link sorted now Jim 😉
You didnt miss much, it could all be an over reaction but we can’t have the site compromised by unauthorised activities.
Hang em high 😀Greg
Re: Is it Safe
Hi had a PM from Dented Porsche which I will forward to you Ken.
Have locked this thread http://www.ukwhitegoods.co.uk/modules.p … 838#135838 until admin see fit.
It concers unauthorised logins to the site, posting apparently. 👿Greg
Re: Bosch Classixx KGU34640GB/06 problem
Hi
I would first of all try switching it off for 24hrs (towels in freezer) and then see how it goes. If a fault is apparent it will more than likely materialise. DON’T fill freezer until you are happy that both fridge and freezer are working correctly over say 7 days. I would recommend putting some cheap bread or something in freezer over this period, not only as a guide to freeze ability but nothing in a frost free freezer compartment isn’t good practice.
If the fault re-occurs and the doors are sealing I would seriously consider getting pro help as these are not really a DIY machine as they are quite sophisticated in respect to a standard fridge freezer.
The link below should point you in the right direction if required 😉Greg
Re: bosch d/w sgs5302gb/07
Hi
It will heat during the final rinse/drying cycle 🙂
As a guide, water should be half way up lower spray arm spigot.
IMHO I reckon the heat could be transient heat from the recirc pump being on too long or our usual suspect the depleted solder pad on the heater relay pin.It may just making slight contact to heat water but not enough to bring it to temp to continue 😀Check that PCB would be my first point of call 😉
Greg
Re: Electrue Selling To General Public
Heres an interesting one. Linked off the pukka Whirlpool website, the spares link……….. http://www.4whirlpool.co.uk 😯
