Forum Replies Created
-
Posts
-
Re: Bosch WFF 2000 – No water filling in drum
Hi
Do you have a full model number, usually around door inner.
The interlocks on these AFAIR are not dependant on water level so the draining of the filter makes no sense, as it should open after approx 2 mins after power off or end of prog 😕
What I would check is the plastic taps for the hot and cold. They have a tendancy to crack, but simulate turning making you think that the tap valve is open/closed, when it can be the opposite.
Way to check water feed to appliance is to remove hose/s from appliance and aim in bucket, then carefully switch on tap/s and see if you get any water 😀Greg
Re: new washing machine
Hi
For that money, you will be able to get a reasonable machine.
Some Miele,Siemens and ISE are in that price bracket and will give you excellent quality,reliability and customer support; unlike some other more well known brands for similar or less money.Greg
Re: NEFF cooker not cutting out
Hi
First knob from left has the thermostat piggy backed onto it. If that is the one you mean the thermostat is p/no 489378 – £17.10 + VAT etc. If its the furthest knob, then thermostat is 488189 – £19.40 + VAT etc, and are available form spares@ukwhitegoods.co.uk if required.Make sure oven is isolated from mains at fuse box before attempting any repairs.
Regards
Greg
Re: NEFF cooker not cutting out
Hi
Its more than likely damaged the thermostat.
To go any further, we will need the full model number (around main oven door opening usually) and, will need you to count from left to right the knob that the thermostat is on.Cheers
Greg
Re: who can get the highest score
Seamy wrote:320.5 but feel very guilty, are animal rights activists watching me??
I would be more worried about P45, he has a nasty sharp beak 😆
Greg
Re: Bosch Maxx WFL226L
FionaC wrote:Had an engineer out to this blasted machine, and it needs a new circuit board, costing around £250.
Holy moley 😯 even Bosch list price is £93.20 +VAT + P&P.
Did he include labour with that £250 aswell as the module?I would consider using an engineer from the list below, some whom specialise in Bosch, just to confirm IMHO
Greg
Re: QED ?
Hi Jim
Duplicate post removed 😆
Try and keep your excitment to a limit 😛
I know what u mean about them Yorkshire lot and footy 😀
GregRe: QED ?
iadom wrote:Not sure I can handle this but indespoint is now calling me Jim and being rather friendly. 🙂
Two options here Jim, he is either bored of you 😀 therefore must be my turn or he has realised you support Man U and taken pity 😆
Greg
