Forum Replies Created
-
AuthorPosts
-
gegsy
ParticipantRe: ERROR CODE LIST
Hi
Any in particular?
A fair selection are here http://www.ukwhitegoods.co.uk/modules.p … topic&t=40 until task is complete 😀
If you have any to contribute, Im sure johnmac11 would appreciate the input 😉Greg
gegsy
ParticipantRe: QED ?
I knew we had, had a run in with whingespoint before 😆
http://www.ukwhitegoods.co.uk/modules.p … ic&t=18512Greg
So called moderators
should have sussed “trouble at t’mill” then :rolls:
Greg
gegsy
ParticipantRe: W/pool ADP4404/5 flashes!
Hi Bob
OWI is the optical glass looking one and the standard round honecomb one is referred as WI.Greg
gegsy
ParticipantRe: Football
iadom wrote:
gegsy wrote:
Can anyone recommend a football team that might have the slightest chance of winning anything.Missed that question Greg, but you know the answer alREDy [sp] 😆
Jim.
Of course, thanks Jimbo 😆
Greg

gegsy
ParticipantRe: W/pool ADP4404/5 flashes!
Hi
If you’ve cleaned the little black thing in the sump, you have met OWI.
You have to be careful not to puncture him, if you are happy that he is clean and un damaged then a replacement may be in order.Sometimes PCB can be faulty but OWI would be my first choice and cheapest 😀
If required he is p/no 481227128407Greg
gegsy
ParticipantRe: Football
Can anyone recommend a football team that might have the slightest chance of winning anything. So many chances.
Well done Blackburn, well deserved win :tup:
Greg
gegsy
ParticipantRe: Bosch Washer Dryer Problem
Hi Brian
Check your email 🙂
Greggegsy
ParticipantRe: Bosch Classixx Electronic – Help!
Hi
If its filling and draining repeatedly, it sounds like the usual problem that occurs.
If you do a search on bosch dishwashers fill problem etc, you should find numerous posts on rectification of that fault.HTH
Greg
gegsy
ParticipantRe: Bosch Classixx Electronic – Help!
Hi
It sounds to me that you may have had some water in the base and by tilting appliance have either evacuated it or moved it away from the anti flood float 😕 If fault occurs, it would do no harm to check for this. The bas is situated below the wash tank.Un plug appliance if you should need to investigate further.
Greg
gegsy
ParticipantRe: Siemens Siwamat 6102 Error Code 1
chantal5000 wrote:Is there any simple way we can find out if a valve has blown?
Hi
With the appliance un plugged and using a multimeter, you can measure each valve in turn (2 wires feeding disconnected) and you should read approx 2 – 3.5 kohm on each valve.HTH
Greg
gegsy
ParticipantRe: Bosch Classixx Electronic – Help!
Hi
If the water level is just below lower spray arm mount then the fill is fine.
When you “expect” the spray arms to turn in a wash motion, what sort of noise do you hear? ie – humming or water dribbling sound.Please try and re check that model number again as it will be needed to proceed further 😀
Greg
PS – Duplicate post removed. It is frustrating waiting for reply I know, but we do get round to them. 😀
gegsy
ParticipantRe: Football

Blackburn Rovers v Arsenal
FA Cup Round 5
Ewood Park
Wednesday, February 28, 2007Kick-off: 8pm

gegsy
ParticipantRe: Football
iadom wrote:But that team are not the Premiership leaders. 😉
Jim.
Excuses excuses. Just aswell for UTD, it may have been the reverse score if they had played 😛
Greg
gegsy
ParticipantRe: Football

Blimey, what a cracking game 😀
Utd were all over the place, 6th place Reading took it to the premiership leaders AGAIN 😆
I may have to start supporting Reading 8)
Greggegsy
ParticipantRe: BOSCH DISHWASHER SGS53C02GB/08
Checking for earth leakage would be my first port of call.
Greg
-
AuthorPosts
